3. Disassembly and Reassemble
Description & Screws
8
Remove the All Cables.
•
55 / 65 inches
Power Cable
-
USI-T Cables
-
9
Remove the ASSY PCB MAIN BOARD.
•
Gently lift up to release the lock (Locking
•
Use both hands to hold (Bottom chassis
Guide Fixing Hole
the left to release the board.
NOTE
When installing the ASSY PCB MAIN BOARD,
verify the board is properly positioned in all 4
mounting slots.
10
Remove the DC VSS-PD BOARD.
•
Use both hands to hold the
lift up at point indicated by the arrow to
release the lock.
55 inches
-
3-4
).
) the board and slide to
SMPS and gently
Picture Description
Power Cable
USI-T Cables
Slide to the left to release the board
Locking
Bottom chassis Guide Fixing Hole
Locking
Bottom chassis Guide Fixing Hole
Slide to the right to release the board
Locking
Locking
Locking
Fixing Hole
Locking
Fixing Hole