Furniture of America CM4559S Manual

Table of Contents

Download this manual

Assembly Instructions

CM4559S

ASSEMBLY RATING

The Assembly Rating is a 5-point system that

shows the degree of effort needed in

Allen Wrench

assembling a specific product (with 1 being

(Included)

easy and 5 being difficult). For some

products, two persons are recommended.

DIFFICULT

EASY

2 PERSONS RECOMMENDED

Page 1 of 6

Rev.14-10-29

Table of Contents

Do you have a question about the CM4559S and is the answer not in the manual?

Page 1 Assembly Instructions CM4559S ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench assembling a specific product (with 1 being (Included) easy and 5 being difficult). For some products, two persons are recommended.
Page 2 Page 2 of 6...
Page 3 Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List #1 x 1 pc #A x 4 pcs Table Top Flat Bolt 5/16”x7/8” #B x 8 pcs #2 x 4 pcs Bolt 5/16”x7/8”...
Page 4 Turn right (clockwise) to tighten #A x 4 pcs #G x 4 pcs Align the bracket (#G) with the pre-drilled hole on the leg (#2). II. Insert a screw (#A) through the bracket (#G) using the Allen wrench (#F) to lock them with the leg (#2).
Page 5 Turn right (clockwise) to tighten #B x 8 pcs #D x 8 pcs #E x 8 pcs With the help of another person, carefully place the table top (#1) facing down on a protected surface. Align the assembled brackets (#G) on the legs (#2) with the pre-drilled holes on the table top (#1).
Page 6 To install the batteries (not included), remove the screw that holds the battery cover using a Phillips screwdriver. Install new AA-size 1.5-volt alkaline batteries with correct polarity (+,-) following the illustration inside the battery cover. Close the battery cover and tighten back the screw.