Table of Contents
Advertisement
Quick Links
USER MANUAL
AFTER SALES SUPPORT:
WWW.SPTOOLS.COM
IMPORTANT
ALL PERSONS WHO ARE TO USE THIS EQUIPMENT MUST THOROUGHLY READ
AND UNDERSTAND THIS INSTRUCTION MANUAL PRIOR TO OPERATION.
SP81466
UNDER BONNET
SMD LED
WORKLIGHT
RETAIN THESE INSTRUCTIONS
AND ATTACH RECEIPT TO
MANUAL FOR FUTURE
NOTE: Proof of purchase must be retained by
the customer as it will be required in the
event of a claim under warranty.
AUSTRALIA: Visit the website's contact page to get in
touch with your local service department.
INTERNATIONAL: Use the county selector to get in touch
with your service department in your country or region.
REFERENCE
Advertisement
Table of Contents
Related Manuals for SP tools SP81466
Summary of Contents for SP tools SP81466
- Page 1 USER MANUAL SP81466 UNDER BONNET SMD LED WORKLIGHT RETAIN THESE INSTRUCTIONS AND ATTACH RECEIPT TO MANUAL FOR FUTURE REFERENCE NOTE: Proof of purchase must be retained by the customer as it will be required in the event of a claim under warranty.
- Page 2 Disposal & Recycling Information Warranty Details INTRODUCTUCTION Thank you for buying this SP Tools product. You can find all the information you need in these operating instructions. Please read the instructions completely with care and observe the advice given. The operating instructions are part of the workshop light and should be kept intact.
- Page 3 △ ! WARNING △! Only plug the charger into a 240 Volt ac power outlet. Before using charger, read all instructions and cautionary markings on battery packs and chargers. The battery charger is intended for indoors use only. Do not expose or use the charger in rain, snow or other damp or wet locations Do not operate the charger in direct sun light or extreme temperature conditions.
- Page 4 Technical data Capacity 3 – 6hrs Burn Time Light Source SMD LED Luminous Power 500 / 1000 Lumen Charger 240v USB Charging Time 5 hours Battery 3.7v/4400mA Battery Type Lithium – ion Input Voltage Micro USB 5v/1000mA Charging Cable Splash Water Protection IP65 Impact Resistance Level IK08...
- Page 5 Multi-function on/dimmer/off switch. To turn the light on push the multi-function switch once. (This will give you 1000lm & up to 3hrs of burn time) Pushing the multi-function switch a second time will dim the light by half. (This will give you 500lm & up to 6hrs of burn time) Pushing the multi-function switch the third time will turn the light off.
- Page 6 To the extent permitted by law and subject to this Limited Warranty, and as part of the terms of the sale of the equipment or part thereof: SP Tools shall not be liable for any form of loss, damage, cost, injury or harm of any kind (whether direct, indirect, special or consequential) howsoever arising from the use or supply of the equipment to the purchaser.
Need help?
Do you have a question about the SP81466 and is the answer not in the manual?
Questions and answers