Advertisement
In order to fit the aerials we will need to remove the aerial knockouts. Care must be taken when
removing knockouts, to avoid damaging the pcb. If unsure the pcbs can be removed by
unclipping them from the back box. Only the knockouts shown in figures 1 and 2 should be used
for routing the aerial cables. The aerials should be mounted as detailed below:
FC-868-A03 and FC-868-D03 High Gain Aerial installed directly and also in conjunction with a
7325 Pole Mounting Kit if required:-
FC-868-B03 and FC-868-E03 Directional Aerial installed in conjunction with a 7325 Pole Mounting
Kit:-
www.acornfiresecurity.com
www.acornfiresecurity.com
Advertisement
