Advertisement
Advertisement
Summary of Contents for RIF6 RIF030109N
-
Page 3: Table Of Contents
TABLE OF CONTENTS Important Safety Instructions Description of Parts Operating Instructions Troubleshooting Specifications Warranty Information Contact Us... -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Make sure the record player is properly ventilated and air circulates freely around the unit. Do not place the unit on a thick carpet, bed, or any place where ventilation holes may be obstructed. Leave at least 4 inches of clearance around the unit. •... - Page 5 IMPORTANT SAFETY INSTRUCTIONS FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 6: Description Of Parts
DESCRIPTION OF PARTS DC 12V RCA OUT AUX IN AUX OUT 20 21 MODE RECORD PLAYER | 6... - Page 7 DESCRIPTION OF PARTS Turntable Platter Bluetooth-In Indicator 45rp Record Adapter – Use it when playing a 45rpm Mode Knob record with a cut out center – Press to select a source: LP, Bluetooth In (BT), and Aux In if available Tonearm –...
-
Page 8: Operating Instructions
OPERATING INSTRUCTIONS Initial Setup Place the unit on a flat and level surface that is stable and free from vibration. 2. Remove the cable tie that is holding the tonearm. Connect the AC adapter to the power jack of the unit. Note: •... - Page 9 OPERATING INSTRUCTIONS Playing a Record Press and hold the Power Volume Knob (11) for 2-3 seconds to turn the unit on. 2. Press the Mode Knob (14) to set the unit to LP mode. The mode indicator will light up. Set the Speed Switch to your desired speed.
- Page 10 2. Press the Mode Knob (14) and select Bluetooth Mode (BT). The Bluetooth indicator will start flashing. Turn on the Bluetooth feature of your audio device. Search for "RIF6 Record Player" and start pairing with the unit. Once your device is successfully paired with the unit, you will hear a short confirmation sound from the unit.
- Page 11 OPERATING INSTRUCTIONS RCA Jack The RCA Jack connects directly to a pair of active/powered speakers or the appropriate input for a stereo system. To connect the RCA Jack, make sure the red plug is connected to the right channel and the white plug is connected to the left channel. Note: The RCA Jack is not designed to be connected directly to the passive/underpowered speakers.
-
Page 12: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION General No power at the outlet Try another power outlet Connect the power adapter to the unit and wall outlet The power adapter is not connected correctly correctly No power The POWER ON/OFF knob is on the "Power Off" Press and hold the POWER knob for 2-3 Seconds to turn the position unit on... - Page 13 Set the speed at 33 1/3, 45, or 78 rpm The stylus is abraded after long time usage Replace it with the spare stylus The volume is set too high on the RIF6 Record Noise or sound is Lower the volume on the RIF6 Record speakers...
-
Page 14: Specifications
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Bluetooth-Out / BTT This unit does not choose "BTT" Bluetooth output Ensure the unit is set to BTT mode mode Cannot connect or Exit the Bluetooth Input "BT" mode. Choose other audio pair with Bluetooth This BT mode is selected source mode and then press and hold the MODE knob to speakers... -
Page 15: Warranty Information
(c) exposure to liquid or infiltration of foreign particles; (d) servicing or modification of the product other than by RIF6. These are our general terms for the warranty service, but we always urge our customers to reach out to us with any issue, regardless of warranty terms. - Page 16 RECORD PLAYER | 16...
Need help?
Do you have a question about the RIF030109N and is the answer not in the manual?
Questions and answers