Philips 20PT91S Quick Use And Setup Manual

Color Television
20PT91S
H U Y
OOKING P
C TV
BEGIN
ABLE
is a single round cable (75
C I /C
ABLE NPUT ONVERTER
ohm) then you're ready to con-
Y our Cable TV input into
nect to the TV.
your home may be a
If you have a Cable
single (75 ohm) cable, or a Converter Box:
Connect the Cable TV signal to
Converter Box installation.
the Cable Signal IN(put) plug
In either case the connec-
on the Converter.
tion to the TV is very easy.
Just put the threaded end
of the cable signal to the
TV's antenna plug and
screw it down tight.
NOTE: The connecting cable
for the Converter is supplied
from the Cable TV Company.
Cable TV Converter
Box Connection
A
NTENNA
BEGIN
round cable (75 ohm) on the end,
C UHF/VHF
OMBINATION
then you're ready to connect it to
A combination antenna
the TV.
receives normal broad-
If your antenna has flat twin-lead
cast channels (VHF 2-13
wire (300 ohm), you first need to
attach the antenna wires to the
and UHF 14-69). Your
screws on a 300 to 75 ohm adapter.
connection is easy since
there is only one 75Ω
(ohm) antenna plug on the
back of your TV - and
that's where the antenna
goes.
1
Twin Lead
Combination VHF/UHF
Wire
Antenna
(Outdoor or Indoor)
Round Cable
75Ω
TV VCR
TO
BEGIN
Antenna or Cable TV signal
B C
ASIC ONNECTION
to the IN FROM ANT(enna)
T he basic Antenna, or
plug on the VCR.
Cable TV, to VCR to
TV connection is shown to
Outdoor
VHF/UHF
the right. For more infor-
Antenna
mation on other hookups
(possible when Cable
Converter/Descrambler
boxes are included) refer to
your accessory VCR and
Cable Converter Owner's
Cable TV signal
Manual for details.
All manuals and user guides at all-guides.com
Quick Use and Setup Guide
T
ABLE OF
Getting Started
Warning/Precautions........................................1
Basic Television Hookups ...............................1
Basic Television and Remote Operation .......................2
How to Use the Onscreen Menu Controls ....................3
Setting Up Your Television for the First Time ..........3-4
• For details on product registration, warranty, and ser-
vice refer to the other literature (Owner's Manual)
included with your TV information packet.
Please retain all these materials and keep them handy
for future reference.
TV (B A
OUR ASIC
If your Cable TV signal
Connect the Cable TV cable to the
ANTENNA/CABLE plug on the TV.
If you have a Cable Converter Box:
Connect the OUT(put) plug from the
Converter to the 75Ω plug on the TV.
Cable TV Company
Cable TV Signal Input
OR
Round Cable
75Ω Ohm
Push the round end of the
If your antenna has a
adapter (or antenna) onto the
75Ω plug on the rear of the TV.
If the round end of the antenna
wire is threaded, screw it down
tight.
300 to 75Ω
Adapter
75Ω
OR
Connect the OUT TO
Connect your
TV plug on the VCR to the
75Ω plug on the TV (connect-
ing cable supplied with the
VCR.)
300 to 75Ω
1
Ohm Adapter
OR
OUT TO TV
IN FROM ANT.
VCR
C
ONTENTS
NOTE: This owner's manual is used with several
different television models. Not all features (and
drawings) discussed in this manual will necessar-
ily match those found with your television set.
This is normal and does not require you contact-
ing your dealer or requesting service.
WARNING: TO PREVENT FIRE OR SHOCK HAZ-
ARD DO NOT EXPOSE THIS UNIT TO RAIN OR
EXCESSIVE MOISTURE.
/C TV C
NTENNA ABLE
2
75Ω
S-VIDEO
75Ω
Back of TV
1
Note: For homes with separate UHF and VHF
antennas you will need an optional combiner
to connect to the TV.
U/V
Combiner
2
MONITOR
AV2 AV1 OUT
75Ω VIDEO
L
AUDIO
S-VIDEO R
Back of TV
Refer to the Owner's
Manual included with your
VCR for other possible con-
nections and TV/VCR operat-
ing details.
Round Cable
75Ω Supplied with VCR
2
75Ω
1
)
ONNECTIONS
S
MART
H
ELP
Remember:
Set the TV for the
type signal you've
just connected (see
the "Tuner" section
on page 3 of this
Set-Up Guide.)
To select only the
channel numbers on
your Cable system
see "Auto Program"
MONITOR
AV2 AV1 OUT
VIDEO
L
AUDIO (page 4). If you use a
R
Cable Converter box,
set the TV to the
same channel as the
converter's CH 3/4
switch (on the rear of
the converter.)
S
MART
H
ELP
Remember,
be sure to set the TV
for the type signal
you've connected
(see the "Tuner"
MONTOR
75Ω AV2 AV1 OUT VIDEO
AUDIO L
S-VIDEO R
section on page 3 of
Back of TV
this Set-Up Guide.)
To set the TV to
75-300 Ohm Adapter
select only the chan-
nel numbers in your
area see how to
"Program" or "Add"
channels in memory
on page 4 (Auto
Program section).
To order any option-
al accessory contact
your dealer or call
the toll-free accesso-
ry ordering number
(1-800-851-8885).
MONITOR
AV2 AV1 OUT
75Ω VIDEO
L
AUDIO
R
S-VIDEO
Back of TV