Page 2
Introducing the ‘Frame-It-All’ U Raised Garden ECO-friendly The framework utilizes our Composite Plastic Timbers. Manufactured from 40% wood fiber and 60% recycled polyethylene, the Eco-friendly durable composite wood grain plastic timbers never rot, warp or splinter. The cut to size timbers connect to brackets with our patented Stacking Joints stakes. Dimensions: 12’ x 12’ X 12” Installation Notes: Before starting to assemble the U Raised Garden, refer to the parts diagram to understand how to screw the brackets onto the timbers. Remove the Stacking joints from the plastic bags and lay out the parts. Each of the joints comprises a stake and two brackets plus screws needed. Tools Needed: Parts identification & Four-Way Joint: • Phillips head screwdriver The Four-Way Joint is comprised of two pieces (A), which when (electrical or battery operated preferred) stacked, form the complete bracket (B). • Hammer Stacking Joint With a screwdriver, (a power driver would be helpful) attach one bracket to each end of each of the Composite Timbers as shown below. Timber shortened for illustrative purposes How the Joints Work Special Instruction for bracketing timbers: Use a Finishing Cap to complete...
Page 3
Assembly Instructions Diagram 1 1) Layout the base level of your raised garden in a straight recangular shape, using 16 (PB) bracket- ed timbers, insert one Stake through the brackets and into each of the corners to lock all sides in place (Diagram 1, at right). Diagram 2 All timbers in Diagram 1 are Diagram 4 2) For the second level, place six 4-way bracketed timbers (FW) on top of the 1st level (see diagram 2), then add parallel-bracketed (PB) timbers as marked on diagram 4. 3) To complete the second level, place the (SB) bracketed timbers with one bracket to complete the rest of the sides and screw the unbrack- eted timber sides into the channel of the 4-way Joint requires both pieces of 4-way bracket bracket (see diagram 4). Joint requires one piece of 4-way bracket Diagram 3 4) Insert one Stake through the brackets into the aperture on the top of the stake beneath it to lock the second level in place.
This manual is also suitable for:
Scenery solutions frame it all classic sienna 300001075Scenery solutions frame it all classic sienna 300001168Scenery solutions frame it all classic sienna 300001169