Service Mode Adjustment; Self Check Mode; Hotel Mode Adjustment; Hotel Mode - Panasonic TC-L32C20P Service Manual

5.3.

Service Mode Adjustment

1. Press the "RECALL" button on the remote control and press " -" vol button on the LCD panel.
2. Press button number 1 on the remote control to select for Adjustment.
3. Self Check to Exit.
5.3.1.

Self Check Mode

1. Press the "MENU" button (on the remote control) and the "DOWN" button on the LCD panel.
2. Press ON/OFF button on the panel to Exit.
5.3.2.

Hotel Mode Adjustment

1. Press the "VOLUME DOWN" button on the TV panel and simultaneously press the AV button on the remote control 3 times to
enter Hotel Mode.
2. Set Hotel mode "on", then press "EXIT" to come out.
5.3.3.

Hotel Mode

All manuals and user guides at all-guides.com
Item
Hotel Mode
Initial INPUT
Initial POS
Initial VOL level
Maximum VOL
level
Button lock
Remote lock
11
Function
Select hotel mode ON/OFF
Select input signal modes.
Set the input, when each time power is switched
on.
Selection :
OFF/Analogue TV/Digital TV/AV1/AV2/AV3/PC/
HDMI1/HDMI2/HDMI3
• Off: give priority to a last memory.
• Selectable input is depend on the model.
Select programme number.
Selection :
Off/0 to 100
• Off: give priority to a last memory.
Adjust the volume when each time power is
switched on.
Selection/Range :
Off/0 to 100
• Off: give priority to a last memory.
Adjust maximum volume.
Range :
0 to 100
Select local key conditions.
Selection :
Off/SETUP/MENU/All
• Off: altogether valid.
• SETUP: only F-key is invalid.
(Tuning guide (menu) can not be selected.)
• MENU: only F-key is invalid.
(only Volume/Mute can be selected.)
• ALL: altogether invalid.
Select remote control key conditions.
Selection :
Off/SETUP/MENU
• Off: altogether valid.
• SETUP: only Setup menu is invalid.
• MENU: Picture/Sound/Setup menu are invalid.
TC-L32C20P