Advertisement
Part Components
A) Monitor
B) Camera w/ additional mount C) Accessories
A
iBEAM Vehicle Safety Sytems
®
Universal
Wireless 5" Monitor
and Camera
Visit
iBEAMUSA.com
for more detailed informatuon about the product and up-to-date vehicle specific
applications.
Product Features
• Wireless camera and monitor kit
• 5" LCD Monitor
• 20 M / 65 FT range
• DC socket for monitor power with USB for smart device charging
• Video triggered by the camera's signal
B
iBEAMUSA.com
©COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
C
TE-WKMN5
INSTALLATION INSTRUCTIONS
#IBEAMSAFETY
TABLE OF CONTENTS
Installation............................................................2-3
Wireless Pairing .....................................................4
Display Settings .....................................................5
Wire Lenths ............................................................6
Specifications .........................................................7
TOOLS REQUIRED
• Wire stripper
• Tape
• Digital Multi-meter
• Cutter
Attention!
When testing the aftermarket
equipment, ensure that all factory equip-
ment is connected before cycling the key to
ignition.
REV. 05/20/2020 INSTTE-WKMN5
Advertisement
Table of Contents
Related Manuals for iBeam TE-WKMN5
Summary of Contents for iBeam TE-WKMN5
- Page 1 B) Camera w/ additional mount C) Accessories Attention! When testing the aftermarket equipment, ensure that all factory equip- ment is connected before cycling the key to ignition. iBEAM Vehicle Safety Sytems ® iBEAMUSA.com ©COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 05/20/2020 INSTTE-WKMN5...
- Page 2 MONITOR INSTALLATION Monitor install and wiring 1. Select the desired mounting option for the monitor. There are two options, a suction cup mount to mount to the windshield (Figure A.1) or double stick tape to be mounted to the dashboard (Figure A.2).
- Page 3 CAMERA INSTALLATION Camera Installation Mount the camera with either the surface mount or the license plate mount. If wanting the surface mount, the two small screws will need to be removed to remove the license plate mount and replace with surface mount. Remove the tail light from the vehicle to allow access to the light bulbs wiring.
- Page 4 WIRELESS PAIRING Monitor to Camera pairing Before operation, the camera and monitor need to be paired wireless to each other. Start by connecting power to both devices. If camera is connected to reverse, the vehicle must be put into the reverse gear. NOTE: Please activate parking brake while pairing for safety.
- Page 5 DISPLAY SETTINGS Display Settings Brightness Press the MENU button to enter into the settings menu, use the + and - buttons to navigate to the PICTURE menu. Press and hold the MENU button for 2 seconds to enter the PICTURE menu. Press the + and - buttons to navigate to the setting you want to choose.
- Page 6 WIRE LENGTHS 1.5 FT 11 FT 4.5 FT 386-257-1187 iBEAMUSA.com...
- Page 7 SPECIFICATIONS TV SYSTEM NTSC EFFECTIVE PIXEL 976 X 592 pixels IP RATING IP67 VISUAL ANGLE 120 horizantal 170 diagonal MIN. ILLUMINATION 0.1 Lux WORKING VOLTAGE 9 - 16V WORKING TEMP. -30 C ~ 70 C STORAGE TEMP. - 40 C ~ 120 C SCREEN SIZE 5 inch LCD DISPLAY RESOLUTION...
- Page 8 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra Recommends MECP certified technicians iBEAM Vehicle Safety Sytems ® iBEAMUSA.com ©COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 05/20/2020 INSTTE-WKMN5...
Need help?
Do you have a question about the TE-WKMN5 and is the answer not in the manual?
Questions and answers