Table of Contents
Advertisement
Quick Links
B 2 Y
2 x Allen Keys
4 x
12 x
Drop side
Wooden
glide pins
dowels
A
B
NOTE: Grooves in fixed side are
1 x Fixed side
guideline marks for mattress thickness
1 x Drop side
1 x Base
*IMPORTANT– RETAIN FOR FUTURE REFERENCE*
PLEASE READ CAREFULLY
Boori International
AUSTRALIA
27-37 Vallance Street
St Mary's NSW
2760 Australia
Ph: 02 9833 3769 Fax: 02 9673 4240
Baby to Youth
Cot hardware and parts list
16 x
20mm
Connecting
bolts
C
2 x Base side extensions
4 x
40mm
54mm
Connecting
Connecting
bolts
E
G
Fixed side has
2 x G bolts and
2 x L capping
nuts inserted.
These remain in
the fixed side
until the cot is
converted to a
king single bed.
4 x Base Supports
2 x End panels (identical)
Glide pin holes
Holes for fixed
for drop side panel
Boori UK Limited
UNITED KINGDOM
Wells house, Unit 5
Woolley Barns, Woolley
Wantage, OX12 8TA UK
Ph: 44 14 8863 9500 Fax: 44 14 8863 9505
Cot / King Single Bed
4 x
8 x
70mm
Connecting
bolts
bolts
I
NOTE: When
standing end
panels up to
assemble cot
please make sure
you have correct
side up.
Feet need to be
attached at the
lower part of both
the end panels.
2 x Left cot feet
2 x Right cot feet
side panel
2 x Base extensions
4 x
80mm
Connecting
bolts
J
V 07/06
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for boori B 2 Y
Summary of Contents for boori B 2 Y
- Page 1 2760 Australia Wantage, OX12 8TA UK Ph: 02 9833 3769 Fax: 02 9673 4240 Ph: 44 14 8863 9500 Fax: 44 14 8863 9505 B 2 Y Baby to Youth Cot / King Single Bed 2 x Allen Keys Cot hardware and parts list...
- Page 2 Boori COT/JUNIOR BED assembly instructions FOR AUSTRALIA AND NEW ZEALAND (AS/NZS 2172:2003) RECOMMENDED MATTRESS SIZE 1310mm X 750mm X 110mm This cot has been manufactured for use with a mattress which measures 750mm wide by 1310mm long and a maximum thickness of 120mm. The width and length are specified because it is important that the gaps between the mattress sides and ends of the cot will not exceed 40mm.
- Page 3 Baby to Youth COT assembly instructions Note: Due to the weight of this product assembly of this cot requires 2 people. Attaching the cot feet B: Screw 4 x feet A: Lay cot end to end panel using panels onto the 4 x G bolts.
- Page 4 Baby to Youth COT assembly instructions Attaching the fixed side Attaching the fixed side requires two people as end panels will not free stand. Connect the fixed side panel to the end panels using 4 x I bolts. (DO NOT over tighten at this stage) Placing base supports for newborn &...
- Page 5 Baby to Youth COT assembly instructions Lowering base into cot NOTE: Make sure base is facing up. Lower the base into the cot and place onto base supports making sure the base is facing up. Screw onto base supports using 4 x E bolts.
- Page 6 B 2 Y Cot to King Single Bed From Baby To Youth REMAINING BOXES PLEASE STORE YOUR REMAINING BOXES FOR YOUR KING SINGLE BED IN A DRY SAFE AREA FOR FUTURE USE V 07/06...
Need help?
Do you have a question about the B 2 Y and is the answer not in the manual?
Questions and answers