Download Print this page

Bike Tree HD Assembly Instructions

ASSEMBLY INSTRUCTIONS

PACKAGE INCLUDES:

ITEM 1: FORK (1)

ITEM 5: WALL TUBE (1)

ITEM 2: LEGS (2) -2a & 2b

ITEM 6: QUICK-RELEASE PINS (2)

ITEM 3: LOWER TUBE (1)

ITEM 7: HANGER RODS (2)

ITEM 4: HUBS (2)

NOTE: HUBS AND LEGS ARE PACKAGED TOGETHER FOR SPACE SAVINGS.

Table of Contents

Do you have a question about the HD and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS PACKAGE INCLUDES: ITEM 1: FORK (1) ITEM 5: WALL TUBE (1) ITEM 2: LEGS (2) -2a & 2b ITEM 6: QUICK-RELEASE PINS (2) ITEM 3: LOWER TUBE (1) ITEM 7: HANGER RODS (2) ITEM 4: HUBS (2) NOTE: HUBS AND LEGS ARE PACKAGED TOGETHER FOR SPACE SAVINGS.
Page 2 (ITEM 5) and secure using quick-release pin (ITEM 6). Insert ITEM 5 into ITEM 3. Lean assembled Bike Tree against wall. Vertical tubes must be parallel to the wall. Rubber feet of both legs must be equally spaced from wall.