Advertisement
50555
OPERATOR'S MANUAL
CHARGED PLATE ANALYZER
Made in America
DESCO EMIT WEST - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Fax (909) 627-7449
DESCO EMIT EAST - 90 Hudson Road, Canton, MA 02021-1407 • (781) 821-8370 • Fax (781) 575-0172 • Web Site: DescoEMIT.com
© 2007 DESCO INDUSTRIES INC.
TB-6521 02/07 Page 1 of 7
Employee Owned
Advertisement
Table of Contents
Related Manuals for Desco EMIT 50555
Summary of Contents for Desco EMIT 50555
- Page 1 DESCO EMIT WEST - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Fax (909) 627-7449 DESCO EMIT EAST - 90 Hudson Road, Canton, MA 02021-1407 • (781) 821-8370 • Fax (781) 575-0172 • Web Site: DescoEMIT.com © 2007 DESCO INDUSTRIES INC.
- Page 2 MODEL 268A-1 RETURN POLICIES AND PROCEDURES WARRANTY FACTORY REPAIR: Monroe Electronics, Inc., warrants to the Owners, this Return authorization is required for factory repair work. instrument to be free from defects in material and Material being returned to the factory for repair must workmanship for a period of two years after shipment have a Return Material Authorization number.
- Page 3 TABLE OF CONTENTS Section 1 Specifications Page 1 Section 2 General Information Page 2 Section 3 Operation Page 4 Section 4 Maintenance Page 6 APPENDIX I Variable Timer Trip Point Option Page 7 Copyright© 1998 Monroe Electronics, Inc. Printed in USA P/N 0340097...
- Page 4 Section 1 Section 2 SPECIFICATIONS GENERAL INFORMATION CHARGED PLATE/PROBE ASSEMBLY: The Charged Plate Analyzer Model 268A separates • Designed to EOS/ESD Association standard into two components connected by a ten-foot cable. • Standard tripod mount The top part with the plate attached contains the •...
- Page 5 IMPORTANT NOTE Section 3 OPERATION In order to maintain proper operation of the floating plate, it is essential that the support insulators be kept BASIC OPERATION - DISCHARGE MODE: scrupulously clean. Consider the following: 1. Separate sections and position as necessary. Connect to the proper power source and press "|"...
- Page 6 BASIC OPERATION - PEAK MODE: Section 4 MAINTENANCE Peak mode is useful for checking balance in pulse ionizing systems. The timer is not associated with GENERAL: these measurements. The internal high voltage Field maintenance of Model 268A should be limited to charging source is not normally used.
- Page 7 APPENDIX I MODEL 268A-1T CHARGED PLATE ANALYZER WITH VARIABLE TIMER OPTION VARIABLE TIMER OPTION The Model 268A-1T Charged Plate Monitor with variable timer stop option has the same two timer ranges as the standard unit when set in the "FIXED" mode of operation.
Need help?
Do you have a question about the 50555 and is the answer not in the manual?
Questions and answers