nest HOMEBASE Assembly Instructions

HOMEBASE
A S S E M B LY I N S T R U C T I O N S
1 Center Support Beam
PA R T S
4 Black Corner Bracket Pegs 2 Fabric Encased Slates 9 5inch Wood Legs (optional)
A s s e m b l y
Remove all pegs from the interlocking corner
brackets.
A S S E M B LY
and the two shorter end rails are parallel.
Remove all pegs from the
1
interlocking corner brackets.
Arrange the rails so the arrows
2
point up. Organize them so that
the two longer side rails are
parallel and the two shorter end
rails are parallel.
®
P A R T S
P A R T S
2 Shorter End Rails
1 Center Support Beam
1 Center Support Beam
2 Shorter End Rails
1 Center Support
4 Black Corner Bracket Pegs 2 Fabric Encased Slates 9 5inch Wood Legs (optional) 4 Black Corner Bracket Pegs 2 Fabric Encased Slates 9 5inch Wood Legs (optional) Beam
2 Fabric Encased
Slats
2 USB Charging Ports Kits
Step 3. Now align the joints in the four corners and push
them together. Corner brackets should interlock.
Insert a peg into each of the four joints and push
Step 4.
them down firmly, so everything is properly
3
5
1 Center Support Beam 1 Center Support Beam
P A R T S P A R T S
2 Shorter End Rails
2 Shorter End Rails
2 Longer Side Rails
1 Center Support Beam
4 Black Corner Bracket Pegs 2 Fabric Encased Slates 9 5inch Wood Legs (optional) 4 Black Corner Bracket Pegs 2 Fabric Encased Slates 9 5inch Wood Legs (
2 Shorter End Rails
4 Black Corner Bracket Pegs 2 Fabric Encased Slates 9 5inch Wood Legs (opt
Step 3. Now align the joints in the four corners and push
them together. Corner brackets should interlock.
4 Black Corner
2 USB Charging Ports Kits
2 USB Charging Ports Kits
2 USB Charging Ports Kits
Bracket Pegs
A s s e m b l y
Insert a peg into each of the four joints and push
Step 4.
them down firmly, so everything is properly
A s s e m b l y
Now align the joints in the four
aligned.
corners and push them together.
Step 5. Slide the black center support beam, arrow
Corner brackets should interlock.
pointing up, in place. Make sure you have pushed
the beam all the way down so it is level with the
head and foot of the frame.
Slide the black center support beam, arrow pointing up, in place. Make sure
you have pushed the beam all the way down so it is level with the head and
foot of the frame.
P A R T S P A R T S
2 Shorter End Rails 2 Shorter End Rails
P A R T S
2 Longer Side Rails
2 Longer Side Rails
2 Longer Side Rails
2 Shorter End Rails
2 Longer Side Rails
2 USB Charging Ports Kits 2 USB Charging Ports Kits
A s s e m b l y
2 USB Charging
Ports Kits
2 USB Charging Ports Kits
aligned.
Insert a peg into each of the four
4
joints and push them down firmly,
so everything is properly aligned.
2 Longer Side Rails 2 Longer Side Rails
2 Longer Side Rails
7 5-inch Wood Legs
(regular)
2 5-inch Wood Legs
(smaller)