Page 2
9. Var uppmärksam: Titta på vad du gör. Kontaktinformation Använd sunt förnuft. Använd inte verktyget när Verktygsboden Erfilux AB du är trött. Källbäcksrydsgatan 1 10. Max 1,25 mm plåt. Använd inte falsmaskinen SE-507 42 Borås på tjockare plåt än 1,25 mm. Telefon: 033-202650 11.
Page 3
4. Använd en fast nyckel 14 mm för att lossa Justering ändskruvarna (#14) som håller fast profilhjulen Falsmaskinen behöver vanligtvis justeras av (#10) för att ta bort brickorna (#13). användaren. Om maskinen inte är rätt inställd påverkas kvaliteten av resultatet negativt. Om du 5.
Page 6
Contact 9. BE AWARE. See what you do. Use common sense. Do not use the tool when you are tired. PELA Tools 10. MAX 1.25 mm sheet. Do not use the beading Solängsvägen 13 machine on sheets thicker than 1.25 mm.
Page 7
3. Remove the profile wheels (#9) Adjustment 4. Use a 14 mm wrench to loosen the end screws The beading machine usually needs to be adjusted (#14) that secure the profile wheels (#10) to by the user. If the machine is not set correctly, the remove the washers (#13).
Page 8
Part: Description: Qty: Part: Description: Qty: Base plate Handle protection Roll block Allen screw M6x16 Drive shaft 19-1 1/2” Semi-Round profile wheel (convex) Shaft 19-2 1/2” Semi-Round profile wheel (concave) Gear 20-1 3/8”Semi-Round profile wheel (convex) Washer 20-2 3/8”Semi-Round profile wheel (concave) Bolts for roll block M14x30 21-1...
Page 10
Verktygsboden Erfilux AB Källbäcksrydsgatan 1, SE-507 42 Borås...