Download Print this page

overstock GFM30731E Assembly Instructions Manual

11.4'x11.4x9.5' hard top gazebo with curtains

Advertisement

Quick Links

GFM30731E
Outdoor Furniture
IMPORTANT
If you have any problems with this product (missing or damaged parts, assembly issues, etc.),
PLEASE DO NOT RETURN TO THE RETAILER/STORE
where you purchased the product.
1-866-988-3300
Please call our Toll-Free Customer Service Hotline at:
Between 8:00 AM and 5:00 PM Pacific Standard Time, Monday through Friday
To expedite any future warranty claims, please retain the instruction sheet, warranty card
and receipt for future use.
Care and Maintenance
Store furniture in an upright position. Be careful not to allow water to build up in frames, as this will cause
corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water.
Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax
for maximum protection against UV rays and/or salty, damp air. If your set includes cushions, slings, and/or
an umbrella, they may be cleaned by hand with a solution of soap and water with a clean water rinse.
(Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or damage). After
cleaning cushions, tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry
fabric goods). Do not use bleach or solvents to clean any product! This will void the warranty.
16

Advertisement

loading
Need help?

Need help?

Do you have a question about the GFM30731E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for overstock GFM30731E

  • Page 1 GFM30731E Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE where you purchased the product. 1-866-988-3300 Please call our Toll-Free Customer Service Hotline at:...
  • Page 2 GFM30731E Outdoor Furniture 1-Year Limited Warranty Program For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
  • Page 3 Assembly Instructions GFM30731E 11.4'x11.4x9.5' Hard Top Gazebo with Curtains Questions, problems, or missing parts? Before returning to the store, call Customer Service. 1-866-988-3300 8 a.m. -5 p.m., PST Monday - Friday Retain this manual for future use.
  • Page 4: Parts And Tools

    GFM30731E Parts & Tools PART PICTURE & DESCRIPTION PART PICTURE & DESCRIPTION Post Top Frame Plug Long Beam 1 Metal Plate Cover Component Long Beam 2 Incline Connecting Plate Fabric Rod Middle Connecting Plate Corner Incline Tube Incline Outer Metal Part...
  • Page 5 GFM30731E Border Tube 1 Netting 48+1 Border Tube 2 Split Ring AA 184+1 Top Border Tube M6x15 Combination Bolt 26+1 Top Cover Plate M6x30 Combination Bolt CC 32+1 Cover Plate 1 M6x40 Combination Bolt DD 16+1 Cover Plate 2 M6x40 Bolt...
  • Page 6 GFM30731E Post Base Plate Post Base Cap Beam Decorator Beam Lining WARNING: To avoid damage of this production, please use either the carton or another soft Right Corner Support Bar surface such as carpet as a working surface to prevent product damage during assembly.
  • Page 7 GFM30731E Gazebo Assembly Step 1: • Attach the post base cap (L1) and the post base plate (L) to the posts (A) using M6x15 combination bolts (AA). • Repeat this step for the other three posts (A). • Fully tighten the bolts using the hex wrench (JJ).
  • Page 8 GFM30731E Step 3: • Insert fabric rod (B2) into fabric rod cap (U), then attach to the assembled long beacon (B & B1) by using M6x40 bolts (DD). • Do not fully tighten all the bolts at this step. Step 4: •...
  • Page 9 GFM30731E Step 5: • Attach the assembled long beam (B & B1) to the assembled posts (A) using M6x40 combination bolts (CC) as shown below. • Do not fully tighten all the bolts at this step. Step 6: • Attach the left corner support bar (N1) to the long beam 2 (B1) by using M6x15 combination bolts (AA).
  • Page 10 GFM30731E Step 7: • Attach the corner fitting (N2) to the corner incline tube (C) using M6x15 combination bolt (AA). • Attach the middle fitting (N3) to the middle incline tube (C1) using M6x15 combination bolt (AA). • Repeat this step for the other three corner incline tubes (C) and the other three middle incline tubes (C1).
  • Page 11 GFM30731E Step 9: • Attach the middle incline tube (C1) to the assembled beam (B & B1) by using the M6 nuts (FF) through the middle fitting (N3). • Insert the middle incline tube (C1) into the top frame tube (E) as shown below.
  • Page 12 GFM30731E Step 11: • Attach the metal plate 1 (H) to the top border tube (F2) using the M6x15 combination bolts (AA). • Do not fully tighten all the bolts at this step. Step 12: • Attach the top cover plate (G) to the metal plate 1 (H) using the M6x40 combination bolts (CC).
  • Page 13 GFM30731E Step 13: • Attach the top corner incline tube (C2) to the top frame plug (P) using the M6x15 combination bolts (AA). • Attach the short horizontal tube (D), the long horizontal tube (D1) and the corner incline tube (C), to the incline connecting plate (Q) using the M6x15 combination bolt (AA).
  • Page 14 GFM30731E Step 15: • Attach metal plate cover component (P1) to the metal plate 8 (K2) to using the M6x15 combination bolts (AA). • Do not fully tighten all the bolts at this step.. Step 16: • Attach the metal plate 7 (K1) and the metal plate 6 (K) to the border tube (F &...
  • Page 15 GFM30731E Step 17: • Attach the cover plate (G1) to the assembled frame by using the M6x40 combination bolts (CC) as shown below. • Do not fully tighten all the bolts at this step. Step 18: • Attach the metal plate 4 (J) and metal plate 5 (J1) to border tube (F &...
  • Page 16 GFM30731E Step 19: • Attach the metal plate 2 (H1) and the metal plate 3 (H2) to the border tube (F & F1) using the M6x30 combination bolts (BB). • Attach the metal plate 2 (H1) and the metal plate 3 (H2) to the corner incline tube (C) using the M6x15 combination bolts (AA).
  • Page 17 GFM30731E Step 21: • Attach the incline outer metal part (R) and the border tube outer metal part (R1) to the assembled frame using the M6x15 combination bolts (AA) as shown below. • Do not fully tighten all the bolts at this step.
  • Page 18 GFM30731E Step 23: • Attach the netting (V) to the assembled gazebo by using the split ring (W) as shown below.