Advertisement
Advertisement
Table of Contents
Related Manuals for Cable-Tronix CTADM-806a
Summary of Contents for Cable-Tronix CTADM-806a
- Page 1 INSTALLATION MANUAL CTADM-806a Rack Mount Agile Audio/Video Demodulator...
-
Page 2: Package Contents
SAW filtering for excellent vestigial sideband response, keyed AGC for picture stability, exceptional differential gain and and phase, and quadrature single tuned audio detection. The CTADM-806a is rack mountable in a standard EIA 19” rack. -
Page 3: Specifications
SPECIFICATIONS CTADM-806a Rack Mount Agile Audio/Video Demodulator Specifications (Typical) 1. Bandwidth 54 – 806 MHz VHF 2 -13, UHF 14 – 69 2. Channels CATV 2 – 125 HRC/IRC offsets Single channel, +40 dBmV maximum 3. Input Level 60 channels, +20dBmV maximum @ -47dbm input VHF=70dB, UHF=60dB 4. -
Page 4: Unpacking And Handling
1. UNPACKING and HANDLING Each unit is shipped assembled and factory tested. Ensure that all accessories are removed from the container before discarding packing material 2. MECHANICAL INSPECTION Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is clean, and no connectors are broken, damaged, or loose. -
Page 5: Hardware Connections
Video level setting from the CTADM-806a should be 140 IRE or 1 V Peak-to-Peak. Adjust as necessary. d. If the CTADM-806a audio and video levels are in spec, but audio volume and video brightness need adjustment then those adjustments should be made at the modulator,... -
Page 6: Troubleshooting
Make sure the appropriate mode is selected using the Mode Selector Button. d. If the CTADM-806a is not receiving power make sure the power cord is firmly connected to the power source/outlet. Be sure the power source is properly rated to handle the CTADM-806a load especially if other equipment is being powered by that same source.
Need help?
Do you have a question about the CTADM-806a and is the answer not in the manual?
Questions and answers