Subscribe to Our Youtube Channel
Related Manuals for Bull 45551CE
Summary of Contents for Bull 45551CE
- Page 1 ASSEMBLY & OPERATING INSTRUCTIONS MODEL #45551CE 770mm PEDESTAL CE CART MODEL #45551 30” PEDESTAL CSA CART FOR USE WITH ANGUS , LONESTAR SELECT & OUTLAW GRILL HEADS 2018...
-
Page 2: Table Of Contents
TABLE OF CONTENTS PAGE # HARDWARE LIST ……………………………………………………………………………………………………………3 ASSEMBLY INSTRUCTIONS ……………………………………………………………………………………………..4 CLEANING &MAINTENANCE …………………………………………………………………………………………..9 CLEANING THE GRILL CART ……………………………………………………………………………….………9 PARTS LIST …………………………………………………………………………………………………………………..10 EXPLODED ILLUSTRATION………………………………………………………………………………………………..11 LIMITED WARRANTY………………………………………………………………………………………………………..12 READ THE FOLLOWING INSTRUCTIONS CAREFULLY AND BE SURE YOUR GRILL CART IS PROPERLY INSTALLED, ASSEMBLED AND CARED FOR. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE. -
Page 3: Hardware List
HARDWARE LIST 1C – 8 x 20 mm Allen pan head screw 1A – 5 x 12 mm Allen pan head screw 1B – 6 x 10mm Phillips flat head screw (4x) (16x) (14x) *CE only* 1D – 8.5 x 16 mm Small flat washer (16x) 1E –... -
Page 4: Assembly Instructions
Inspect parts for any damage and contact our service center or local dealer for replacement of any damaged parts. Do not assemble or operate a grill cart that appears to be damaged. For your safety, Bull recommends the assistance of another person when assembling larger and/or heavier items. - Page 5 ASSEMBLY INSTRUCTIONS (Cont.) CE VERSION ONLY WITH CYLINDER SUPPORT Step #2 : For CE versions only ,fix the cylinder support bracket underneath the cart using the 4 (1B) screws suplied. Item No. Part Number Description 6x10MM PHILLIPS FLAT HEAD SCREW 35050 CE CYLINDER SUPPORT 2018...
- Page 6 ASSEMBLY INSTRUCTIONS (Cont.) Step #3 : Use two 1 x ¼” (1F)Philips pan head screws and two ¼” x ¾” washers (1E) for each handle and attach the handles on the exterior of each door. 2018...
- Page 7 ASSEMBLY INSTRUCTIONS (Cont.) Step #4 . Ensure the swivel casters are in the locked position in order to prevent the cart from moving and causing injury. Place the grill head onto the cart (this step will require at least 2 people). Attach the grill head to the cart body using six 5 x 12 mm phillips head screws (1A) and six flat washers 5.3 x 15 mm (1G) .
- Page 8 ASSEMBLY INSTRUCTIONS (Cont.) Step #5. If your grill head is equipped with an interior light system, attach the grill head transformer to the plate on the inside left of the cart. The screws are already pre-assembled onto the plate. Your grill cart is now completely assembled and ready for use! Please read and understand all safety, warning and use instructions in the grill manual before use.
-
Page 9: Cleaning &Maintenance
Regular cleaning is the best way to prevent corrosion and add years of enjoyment to your Bull stainless steel products. WARNING! Do not remove the secondary tank prevention bar. Storing a second tank in your cart could cause serious injury. -
Page 10: Parts List
PARTS LIST MODEL #45551CE 770mm PEDESTAL CE CART MODEL #45551 30” PEDESTAL CSA CART FOR USE WITH ANGUS , LONESTAR SELECT & OUTLAW GRILL HEADS Warranty period may vary depending Distributor and Country regulations. • Example: Minimum is 2 years in Europe. -
Page 11: Exploded Illustration
EXPLODED ILLUSTRATION MODEL #45551CE 770mm PEDESTAL CE CART MODEL #45551 30” PEDESTAL CSA CART FOR USE WITH ANGUS , LONESTAR SELECT & OUTLAW GRILL HEADS 2018... -
Page 12: Limited Warranty
Bull Europe Ltd.,Zamco Buildings ,Mill Street,Qormi,Qrm3103,Malta Bull Outdoor Products Inc. and Bull Europe Ltd warrants to the original purchaser at the original site of delivery with proof of purchase of each Outdoor Gas Grill that when subject to normal residential use, it is free from defects in workmanship and materials for the periods specified below.
Need help?
Do you have a question about the 45551CE and is the answer not in the manual?
Questions and answers