Table of Contents
Advertisement
Configuration B: Mount the Bluetooth
RS-232C interface cable into the connector at the rear of the charger.
Scanner
Bluetooth
interface
Charger Rear View
Bluetooth
Adapter
(3) When using the RS-232C interface for the first time, change the Bluetooth
the RS-232C interface with the configuration software BA Setting*. For details, refer to Chapter 4.
Note: The charger built-in type of the RS-232C interface cable is exclusively designed for the Bluetooth
mounted inside the charger.
Note: Handle only the connector when unplugging the DC power supply from the jack. Pulling on the cable risks
damaging the internal conductors.
Note: Avoid unnecessary connection and disconnection. Excessive wear can lead to faulty connections.
Note: Use only the AC adapter provided.
* Registered users can download the device drivers and the configuration software (BA Setting) from QBdirect, their
customer support section on the Denso Wave website at no extra charge.
For further details on QBdirect or to register, visit the following URL.
http://www.qbdirect.net
®
adapter inside the charger and plug the power cord included with the
AC adapter
Charger
AC adapter
Charger built-in type of RS-232C
interface cable
Charger built-in type of
RS-232C interface cable
RS-232C interface
Power cord included with RS-232C
interface cable
Power supply connector
Configuration B
7
充電器組み込み用
RS-232Cインタフェースケーブル
®
adapter's interface settings to select
®
adapter
Advertisement
Table of Contents
