Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Harper Goossen
-
Page 3: Safety Warning
The Power Plate can present hazards to an operator who follows unsafe procedures in either the operation or maintenance of the unit. Therefore, SAFETY WARNINGS are presented at certain locations in the text. Harper Industries is not responsible for accidents or injuries that result from the misuse or lack of maintenance of the Power Plate. -
Page 4: Limited Warranty
TWELVE MONTHS from the date of retail purchase to the original purchaser. Harper Industries will repair or replace, at our option, any part that our examination shows to be defective. Warranty is limited to parts, labor and ground freight delivery of replacement parts. - Page 5 Power Plate Specifications Attachment Conventional skid loader quick-attach 3-Point Hitch Category-1 Construction Heavy-duty ¼” plate steel Finish Polyurethane paint with epoxy primer Weight 280 lbs. For standard skid loader systems 5.4 cu. in. with 14 - 18 gpm Hydraulic Motor For high-flow skid loader systems 7.1 cu.
-
Page 6: Equipment & Controls
Control Identification Safety Section SAFETY WARNING! Altering this equipment in any manner which adversely affects its operation, performance, durability, or use will void the warranty and may cause hazardous conditions. EQUIPMENT & CONTROLS • READ AND UNDERSTAND THE OWNER’S MANUAL BEFORE OPERATION. -
Page 7: Safety Decals
If anything in this manual is unclear or hard to understand, contact your dealer or • Never use equipment in a manner for call Harper Industries (800-835-1042) for which it was not designed. clarification before proceeding. • When replacing fasteners, use the... -
Page 8: Operation
NOTE: When tightening two or more be accomplished by tilting the bucket screws on the same part, DO NOT tighten cylinder of the skid loader.) screws completely right away, or one at a 3. Attach the PTO shaft of the implement to time. - Page 9 POWER PLATE PARTS...