MedNet WB1000 Instruction Manual

MedNet WB1000 Instruction Manual

Blanket warming unit

Advertisement

Quick Links

Blanket Warming Unit
WB1000
General Description
The Blanket Warming Unit model WB1000 is a revolutionary electrical medical device used
to keep patients warm during anaesthesia and surgery. The device comprises a reusable
controller and disposable, single-use blankets.
The Blanket Warming Unit Model WB1000 is used to maintain normal body temperature
during surgical procedures. The clinical staff who use the device is anaesthetists, anaesthetic
assistants, operating department practitioners and nurses in theatre, the recovery room and
the critical care unit.
The Blanket Warming Unit Model WB1000 is the world's first closed warming system,
using conduction and radiation warming to prevent and treat preoperative hypothermia. It includes
two primary components: a warming unit and a disposable blanket. The Warming Blanket Unit is
connected to a single-use blanket by an innovative coaxial flexible hose. The coaxial flexible hose
contains an inner and outer hose; warm air from the warming unit passes through the inner hose
and into the blanket. Once the warmed air reaches the blanket, it will move with the flow path of the
blanket, and is then recycled to the warming unit via the outer hose. The closed warming blanket is
disposable and airtight.
Carefully read the operating instructions before use.
Failure to follow may cause severe injuries.
Indications
Prevention and treatment of hypothermia
Warnings
Failure to follow may cause injuries to person.
To avoid the risk of electric shock, this device must only be connected
to a mains supply with protective earth.
To prevent electromagnetic interference to the unit from other devices,
the other devices must meet EMC requirements.
The Blanket Warming Unit meets medical electronic interference
requirements. If radio frequency interference with other equipment
should occur, connect the unit to a different power source.
Continuously monitor temperature and skin temperature during use on
unconscious patients, elder patients, or pediatric patients.
Risk of electric shock, always unplug power cord before cleaning.
Do NOT use on individuals with circulatory problems unless managed
and monitored by a healthcare professional.
DO NOT place the hose directly on a patient without a blanket.
DO NOT insert the hose underneath the patient, or apply any pressure to
the hose.
DO NOT obstruct vents of the device.
Temperatures will vary according to the room temperature and blanket
sizes.
DO NOT operate if the device is damaged or malfunctioning.
DO NOT position the device in areas in which the appliance plug and
socket are difficult to operate
Device must only be opened or serviced by qualified personnel such as
certified electricians or certified clinical engineers familiar with repair
practices for servicing medical devices, and in accordance with the
Service Manual.
.
Instruction Manual
Contraindications
DO NOT apply heat directly to open wounds or ischemic limbs.
DO NOT apply to extremities during surgeries when an
artery to the extremity is clamped.
Caution
Failure to follow may cause damage to the product.
DO NOT use this unit in any manner other than the purpose or
the operation method described in this instruction manual.
Use only the power cord specified for this product.
DO NOT submerge, spray, pour, or spill any liquid on the unit.
DO NOT operate in wet or moist conditions.
DO NOT drop or hit the product.
Store in a cool dry place.
DO NOT open or disassemble the unit.
No modification of this unit is allowed.
Some national laws restricts this device to sale by or on the order
of a physician.
0197
KEN-IFU-WB1000-A0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WB1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MedNet WB1000

  • Page 1 Instruction Manual WB1000 General Description The Blanket Warming Unit model WB1000 is a revolutionary electrical medical device used to keep patients warm during anaesthesia and surgery. The device comprises a reusable controller and disposable, single-use blankets. The Blanket Warming Unit Model WB1000 is used to maintain normal body temperature during surgical procedures.
  • Page 2: Control Unit

    Mounting on the Trolley / I.V. Pole 1. Tighten the screw lock and make 2. Place the WB1000 on the trolley / I.V. sure it is securely clamped to the and align the...
  • Page 3 3. Connect the distal extremity the hose connector Mounting on the Bedrail Bracket 1. Mount the bedrail bracket on the 2. Place the WB1000 on the bedrail guardrail of the bed. bracket. 3. Connect the distal extremity 4. Hook the flexible hose around the the hose connector WB1000.
  • Page 4 2. Select the desired fan setting. 38 ℃ 32 ℃ The WB1000 will reset/default to the low fan setting each time the unit is powered up. F-L0 The high fan setting may be pre-selected whilst in Standby mode prior to selecting the desired temperature.
  • Page 5: Over Temperature Condition

    Application Steps Instructions for Use 43 ℃ TEMP 38 ℃ 4. Press the "START/STOP" button to begin operation. 32 ℃ 843C Press the "START/STOP" button when the device is “Off” to power on the device. Press the "START/STOP" button when the device is “On” to power off the device STOP TEMP IN RANGE START...
  • Page 6 User Training In-service training is available from trained professionals or a nominated distributor. System Fault Troubleshooting: If the system fails, it will automatically turn off the heater and fan. The screen will display the fault code, “OVER TEMP” and “TEMP IN RANGE” will illuminate simultaneously. Press any button (except the FAN settings button) to turn the sound off. The warming unit can be reset by disconnecting the warming unit from the main power source, allowing 5 minutes for the system to reset.
  • Page 7: Specification

    Specification Term Blanket Warming Unit Model WB1000 Temperature settings (℃) Low 32 / Medium 38 / High 43 Air temperature at nozzle (℃) High 43 ± 2 / Med 38 ± 2 / Low 32 ± 2 Temperature sensors Fan Setting:...
  • Page 8 Product specifications Picture Code Description Blanket WB1000 • Warming Unit See General Description. • Material: environmental polymer. • Properties: high temperature Hose WB1060 resistance, flexible, axially compressible. • Length: 1.8 m. • Diameter: 60 mm. • HEPA 0.3µm. • HEPA Filter...
  • Page 9: Labeling Symbols

    Catalog Number Batch Code S/N. Serial number Complies with EU directives xxxx Manufacturer Authorized Representative in the European Community MedNet GmbH Dongguan Kaiser Technology Co., Ltd. Borkstrasse 10, 48163 Muenster, No.81 Sanjiang Industrial District, 523462 Hengli Town, Dongguan, Guangdong, CHINA Germany.

Table of Contents