Installation and Operating Installation and operating instructions for the Salamander Eco model 1901 eco Instructions (Ref 1901 eco Dec 2019) Contents Section Important information about installing and using the stove Unpacking Assembly Components Installation Operating instructions 6.1 Fuel 6.2 Before lighting 6.3 Air Controls...
1 - Important information about installing and using the stove • All national and local regulations, including those referring to national and European standards need to be complied with when installing the stove. PLEASE READ THESE INSTRUCTIONS CAREFULLY • The stove must be installed by a registered installer or approved by your local For your safety it is very important that your stove is correctly building control officer.
Check the riddling mechanism operates Ash pan and moves freely. Salamander multipurpose tool Dustpan and brush Build the firebox inside the stove by locating first the baffle, then the left fire brick, followed by the right fire brick. The weight of the baffle holds the assembly together.
PLEASE READ THESE INSTRUCTIONS CAREFULLY For your safety it is very important that your stove is correctly installed. Salamander Stoves cannot accept any responsibility for any fault arising through incorrect installation or use. Regulations All national and local regulations, including those referring to national and European standards need to be complied with when installing the stove.
6 – Operating Instructions Air Controls The Salamander Eco is fitted with three air controls. Fuel Wood PRIMARY AIR CONTROL Use only seasoned timber with a moisture content of less than 20%. Typically this means wood which has been cut and stored in an open dry shelter for between one Located on the front of the ashpan door, the primary air control directs air into the base of and two years.
Lighting a wood fire Refuelling If there is insufficient burning material in the firebed to light a new fuel charge, excessive When burning wood: smoke emission can occur. Refuelling must be carried out onto a sufficient quantity of glowing embers and ash that the new fuel charge will ignite in a reasonable period.
De-ashing the stove Lighting a solid fuel fire When burning manufactured smokeless solid fuel: The action of riddling the grate will allow ash to fall from the bed of the fire into the ash pan Fully open the Primary air control (Turn wheel on ashpan door fully anticlockwise) underneath.
7 – Guidance on safe operation 8 - Maintenance Maintenance should only be carried out when the stove is cool. Fire can be very dangerous During operation, the stove and all the fittings (door handles and controls) get very hot. Before use Between fires in the stove it is good practice to keep ash and debris to a minimum.
Flue gas mass flow Mean C emission (@13% O Nmg/m All individual components of the Salamander eco stove are available as spares. Mean NOx emission (@13% O Nmg/m For the complete list of available spares with prices, go to www.salamanderstoves.com...
Need help?
Do you have a question about the 1901 eco and is the answer not in the manual?
Questions and answers