Model: EST-101 Group: 0+/1 In order to protect your child correctly, the Merlin must always be used and installed as described in these instructions. Please keep this instruction manual in a safe place. Group: 0+/1 If you have any other questions regarding its use, please contact us.
1. Important Notice: 16. If you have any questions about using and installing the child seat, please contact our customer services team. 17. Do not to use any load bearing contact points other than those described in the 1. This child car seat is suitable for children with a weight less than 18kg. 2.
2. Features PART PART PART PART Headrest Headrest Shoulder pad Infant insert adjustment handle Shoulder straps Harness buckle Buckle pad Recline knob Second lock button Support leg Car seat base Support leg for group 0 adjustment button Support leg Harness Rotation handle Adjustment strap indicator...
3. The attention for car using 4-2 Harness adjustment Danger! DO NOT use on a passenger seat with Loosen: press adjusting button an active airbag. If hit by the airbag, death or at the same time pull both shoulder serious injures can occur. straps forwards (Do not pull on the shoulder pads 3).
4-3 Headrest adjustment 4-5 ISOFIX installation and removing ISOFIX installation Pull up: Pull the adjusting handle of the 1. If your vehicle is not equipped with the ISOFIX headrest upwards. insert guides as standard, clip the two insert guides Caution: which are included with the seat with the cut-out Please loose the should straps 5 before facing upwards onto the two ISOFIX attachment...
Isofix Removing from Vehicle Seat 4-8 Removing and Refitting the cover 1. Press Isofix second lock button Cover removing Isofix release button together, press Isofix 1.Turn the child car seat into the forward facing postion and recline to the upright release button towards the red arrow position.
5 Installation 5-2 Forward facing TIP: The child car seat should always be secured in the car via the ISOFIX anchoring, even when there is no child in the seat. CLICK 5-1 Rearward facing CLICK Suitable for group 1: weight 9-18kg (approx. 9 months-4 years) Installed ISOFIX with vehicle seat(See details in 4-5), make sure it is completely engaged and close to vehicle seat.
A) Rotation function (from rearward to forward facing) 6. Side facing installation 1. Grasp the turning knob whilst pressing the safety button simultaneously, turn to the lowest recline position. This child car seat rotates 360° which makes it easier to get your child into or out of the child seat (Easy access function).
8. Notice 1 INSTRUCTION MANUAL 1. This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No. 44, 04 series of amendments for general use in vehicles fitted with ISOFIX anchorages Birth - 18kg (Approx. Birth - 4 years) systems.
Need help?
Do you have a question about the CozyNSafe EST-101 and is the answer not in the manual?
Questions and answers