Advertisement
Powerline Network
T
HE FIRST THING YOU NEED TO KNOW BEFORE YOU BEGIN TO INSTALL
1.
Before installing, make sure your PC meets these requirements for hardware installation:
Microsoft Windows® 98SE, ME, NT, 2000, XP, Vista, MAC or Linux OS
Pentium® 166 MHz processor, equivalent or higher
At least one free Ethernet port for RPL-85 PLC Ethernet Bridge
2. Your PC must not be configured for another network. This means that:
No network clients except for Microsoft Network*, Client for Netware* Networks, or Microsoft Family
Logon* are installed
No network services except file and printer sharing for Microsoft Networks or Personal Web Server*
are installed
No network protocols except Microsoft's TCP/IP, IPX/SPX, NetBEUI, or Net BIOS support for IPX/SPX
are installed
3. Network installation requires two steps:
1.
Install the RPL-85 PLC Ethernet Bridge
2.
For each PC to be added to the network, repeat the process
4. Check that you have the following parts for each PC on the network:
Product installation guide for RPL-85 PLC Ethernet Bridge
1.
RPL-85 PLC Ethernet Bridge
2.
Ethernet Cable (CAT 5)
5. Familiarize yourself with the Powerline device connections:
There is only one Ethernet port. This is used for the connection with PC, xDSL/Router, Cable Modem, or
Wireless AP.
6. Limitation of the PLC device:
To meet the safety regulation, the longest distance between powerline carrier devices will be limited at 200
meter and for in-house use only. More than 200 meter will cause the signal reduction or data loss.
© 2009 . All rights reserved.
All manuals and user guides at all-guides.com
T
HE FIRST THING YOU NEED TO KNOW
...
Page 4
Advertisement
