Subscribe to Our Youtube Channel
Summary of Contents for Coolworks IceProbe IPAC-50W
- Page 1 IceProbe Thermoelectric Aquarium Chiller Model IPAC-50W Instructions & Warranty (For U.S.A. Only)
-
Page 2: Safety Precautions
Safety Precautions To operate your CoolWorks IceProbe Aquarium Chiller: 1. Read all instructions. 2. To protect against electrical shock, do not place cord, plugs, or appliance in water or other liquid. 3. Do not operate this device with a damaged cord or plug or if the device malfunctions. Return device to the factory for examination, repair or adjustment. -
Page 3: Pre-Installation Preparation
Introduction CoolWorks’ IceProbe Thermoelectric Aquarium Chiller (IPAC-50W) is the ideal cooling solution for small aquariums and insulated bait or specimen tanks. Quiet, reliable and efficient, the chiller uses advanced thermoelectric technology to directly convert electricity into cooling power. With its threaded probe, nylon nut, and silicon washer, the IceProbe can be easily bulkheaded through a 1.25” hole into siphon overflows, prefilters, sumps, or aquarium walls, or suspended from the top of the aquarium. -
Page 4: Bulkhead Installation
Bulkhead Installation To achieve a watertight bulkhead installation of the IceProbe: 1. Drill a 1.25-inch diameter hole into your sump/prefilter/aquarium. Note: The hole can be easily drilled through a plastic or acrylic wall using a standard hole saw available at most hardware stores. An experienced glass cutter should be consulted for bulkhead installations in glass aquariums. -
Page 5: Normal Operation
IceProbe Power Converter CoolWorks offers two Proportional Temperature Controllers for aquarium applications. Our TEC-65 controller is designed for tropical aquarium environments, with an adjustable temperature range of 65ºF to 85ºF. Our TEC-45 is designed for cold water aquariums with a temperature range of 45ºF to 65ºF. -
Page 6: Maintenance
IceProbe’s fins. The IceProbe’s fan motor is designed to run continuously, even when used in conjunction with CoolWorks temperature controllers. Compressed air, a small vacuum cleaner attachment, or a small soft brush can be used to remove dust and lint from the fan and thereby extending its useful life. If the fan motor is not running at all or very slowly, contact CoolWorks Customer Service. -
Page 7: Power Specifications
Diagnostics The CoolWorks IceProbe has a straightforward diagnostic system that makes it easy to determine the cause of performance problems. By observing the status of the LED on the electrical cover and determining if the fan motor is operating, the most common failures can be identified and resolved. -
Page 8: Limited One Year Warranty
Should any defect be discovered within one year of date of purchase, CoolWorks Inc. agrees to repair or replace the defective part or product at no charge other than handling and return freight charges, provided said part or product is returned with all shipping charges prepaid to CoolWorks Inc., Service Department, 819 A Street, San Rafael, CA 94901, accompanied by proof of purchase and a letter...
Need help?
Do you have a question about the IceProbe IPAC-50W and is the answer not in the manual?
Questions and answers