1. Manuals
  2. Brands
  3. ThunderDog Manuals
  4. Racks & Stands
  5. TH01THM
  6. Manual

ThunderDog TH01THM Manual

Universal tablet headrest mount
Hide thumbs
1
2
3

Advertisement

Table of Contents

Model: TH01THM
UNIVERSAL TABLET HEADREST MOUNT
Product image:

Assemble the mount:

1. Unscrew the cap and place the cap on the end of the gooseneck
2. Attach the tablet holder to the end of the gooseneck. You will hear a loud "click" once
the holder is secure.
3. Tighten the cap to the tablet holder by turning the cap clockwise.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TH01THM and is the answer not in the manual?

Questions and answers

Summary of Contents for ThunderDog TH01THM

  • Page 1 Model: TH01THM UNIVERSAL TABLET HEADREST MOUNT Product image: Assemble the mount: 1. Unscrew the cap and place the cap on the end of the gooseneck 2. Attach the tablet holder to the end of the gooseneck. You will hear a loud ”click” once the holder is secure.
  • Page 2 Installing the mount to your car headrest: 1. Adjust the width of two fasteners to attach to the posts on the rear seat headrest. 2. Press the two levers forward to lock the mount to the headrest posts. 3. Make sure the mount is positioned with the two-arm cradles at the bottom as shown above.
  • Page 3 Removing your tablet from the mount: 1. Press the switch on the rear of the unit downward to unlock the mount. 2. Raise the single-arm cradle vertically to the desired position. 3. Remove your tablet from the mount.

Table of Contents