Advertisement
Sola Chair Series Adjustments
Height Adjustment
The right-hand lever (sitting in chair) actuates the gas lift mechanism.
• To raise
height: Lift the lever while
lifting your weight from the chair. The
chair will follow your body up. Release
the lever and the new height position
will be held.
• To lower
height: Lift the same lever
while sitting in the chair. Let the chair
move down with your weight and release
the lever at the height desired.
Tips regarding height adjustment:
Find the height at which your feet are flat on the floor and the back of your thighs are
comfortably supported by the seat cushion. Too much pressure on the back of your
thighs means the chair is too high; too little pressure means it is too low.
Seat Height Lever
Pull up to raise and
lower seat.
Tilt Tension Adjustment
Turn knob right (clockwise) to
increase tension. To decrease
tension turn knob left (counter
clockwise).
Seat Height Lever
Pull up to raise and
lower seat.
Forward Position Lock Feature
The position lock is intended to hold the back
in an upright position while the user is seated
in the chair.
The left-hand lever (sitting in chair) locks
and unlocks the rear tilt mechanism.
•
To engage
the lock, push lever down,
while sitting upright in seat, to stop
back tilt.
Forward Position
Lock Lever
Push lever forward to
stop back tilt. Pull
lever up for full tilt.
•
To release
the lock, sit upright in seat
and pull the lever forward for full tilt.
Tips regarding rear tilt lock:
The lever should be moved either
completely back to disengage or completely
forward to engage lock.
Forward Position
Lock Lever
Push lever forward to
stop back tilt. Pull
lever up for full tilt.
Tilt Tension Adjustment Knob
A round control knob is located under the
right side of the seat when sitting in seat.
• Check the adjustment to ensure it
effectively balances your body weight
while moving backward and forward.
If the back moves too easily, turn the
knob clockwise to increase the tension.
• If it is too difficult to lean backward, turn
the knob counter-clockwise to decrease
the balancing force.
Tips regarding tilt tension adjustment:
Find the tension setting which allows you to
relax as you move back and forth. After the
initial adjustment, your chair should follow
you comfortably as you move.
Seat Height Lever
Pull up to raise and
lower seat.
Tilt Tension Adjustment
Turn knob right (clockwise) to
increase tension. To decrease
tension turn knob left (counter
clockwise).
Advertisement
