Subscribe to Our Youtube Channel
Related Manuals for Spark CT-05
Summary of Contents for Spark CT-05
- Page 1 CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD PYRO SIM CONTROLLER CT-05 USER MANUAL CT-05 PYRO SIM CONTROLLER USER MANUAL...
-
Page 2: Table Of Contents
CONTENTS 1 1.PRODUCT INTRODUCTION ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A1 1.1 PRODUCT INTERVIEW ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A2 ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A3 1.2 PRODUCT ACCESSORY 2 TECHNICAL PARAMETER ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A4 3 SCREEN OPERATION GUIDE ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A5 3.1 PANEL INTRODUCTION ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A5 3.1.1 FRONT PANEL INTRODUCTION ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A5 3.1.2 LEFT PANEL INTRODUCTION ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A5 3.1.3 RIGHT PANEL INTRODUCTION ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A6 3.1.4 BACK PANEL INTRODUCTION ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪A6... -
Page 3: 1.Product Introduction
If the information contained in the manual or the product speci cations are changed, Spark Fabrica will not inform you further and responsible for any errors or omissions. - Page 4 CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD 1.1 PRODUCT OVERVIEW Art_Net Signal In Heat Clean Material MIDI Out Fire MIDI In 3 PIN DMX In 3PIN DMX Out 5PIN DMX In 5PIN DMX Out USB Upgraded Interface SAFE :Stop All Operation...
-
Page 5: Product Accessory
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD 1.2 PRODUCT ACCESSORY Security Key Battery USB To MIDI Interface Cable Charger Charger Power Cord 3 Meters Network Cable 3 Meters MIDI Cable 3.5mm Audio Cable Allen Key M2 3 Pin DMX Signal Cable... -
Page 6: Technical Parameter
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD TECHNICAL PARAMETER Identification Category CT-05 PYRO SIM CONTROLLER Model CT-05 Input Voltage& Rate 12.6V DC Nominal Total Power Consumption AC Power Power Input Connector 12.6V 3A Charger Power Output Connector(Daisy Chained) Controllable Heating Power Cord... -
Page 7: Screen Operation Guide
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD SCREEN OPERATION GUIDE 3.1.1 PANEL INTRODUCTION This product has 4 panels according to function:front,le ,right and back panel introduction. ARTNET/LAN USB2.0 Art_Net signals input. Screen system upgrading interface SAFE Machines stop to work. Machines work normally. -
Page 8: Right Panel Introduction
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD 3.1.3 RIGHT PANEL INTRODUCTION TYPE-C DC 12V Standby charge Charger interface. pal interface. CAUTION DC 12V：The required voltage for this interface is 12.6V. CAUTION TYPE-C: The required voltage for this interface is 5V, and the current should be more than 3A. -
Page 9: Status Icons
Clearing Material Time 2019-12-09 11：43：30 Charging Electric Quantity 3.3 DMX PARAMETER This product has channel 2 and channel 3. Please set the quantity of spark machines before set DMX parameter,each unit can be set 1-60. PYRO SIM CONTROLLER USER MANUAL-V1.0 |... - Page 10 CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD DMX Channel 2 model First Channel DMX Value Function Stop Fountain Height 1 Fountain Height 2 Fountain Height 3 Fountain Height 4 Fountain Height 5 Fountain Height 6 Fountain Height 7 Fountain Height 8...
-
Page 11: Ip Address
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD DMX Channel 3 model First Channel DMX Value Function Stop Fountain Height 1 Fountain Height 2 Fountain Height 3 Fountain Height 4 Fountain Height 5 Fountain Height 6 Fountain Height 7 Fountain Height 8... -
Page 12: Native Console's Address
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD Di erent IP address Console’s and computer’s IP address must be di erent, otherwise les will be transmitted failed. For example:If computer’s gateway is 192.168.88.1, and computer’s IP address is 192.168.88.189. Then, console’s IP address should be 192.168.88.*** (The value *** can be any number from 0 - 255 except 189). -
Page 13: Operation Notes
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD OPERATION NOTES 4.1 WORKING CONDITION REQUIRED Please do not use this console in steamy environment to avoid screen fogging on the surface. Please prevent long-term use of this console in dusty, overheated, wet or chemicalenviron- ment, otherwise the inside of console will be damaged. -
Page 14: Safety Tips
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD Please do not use it in enclosed spaces, and keep it in a well-ventilated place. 4.2 SAFETY TIPS Please do not knock or scratch the display screen with sharp/pointed hard object to avoid damaging the screen. -
Page 15: Machine Operation
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD Do not open the shell to repair, or it may cause serious accident. If there is a serious operation problem, please stop using this product immediately. MACHINE OPERATION 5.1 PREPARATION * Before using the console, please con rm that the required accessories are all ready. -
Page 16: Monitor
Press the "HEAT" key, spark machines will enter the heating state, and the heating indicator lights corresponding to spark machines on the screen will appear red. When the indicator lights turn green, it indicates that the heating is completed and spark machines are ready to spark. -
Page 17: Manual Clean
There are 2 kinds of cleaning ways a er entering the cleaning page:clean all &clean some. * Clean all Press the "CLEAN MATERIAL" button at the bottom of the screen, and the indicator lights of all spark machines on the screen will turn red, which means that all the spark machines are cleaning material. -
Page 18: Cue Stack
* Add le Click "Add" to select one or multiple special e ects les in the le page and add them to cue stack. Spark machines will spark from le to right, top to bottom according to e ects les’ order by pressing "FIRE"... -
Page 19: Calendar
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD * Delete le Select one or multiple e ects les and click ”Lock & select” rst, then delete the selected les by clicking “delete”. 5.2.5 Calendar The default is the current time, which can be changed by sliding up or down. -
Page 20: Audio
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD 5.2.6 AUDIO * Select spark machines Select spark machines by lling in “Unit Start No.” and “Unit End No.” * Select sensitivity Sensitivity has 0-9 levels, bigger value means higher sensitivity, and 7 is a recommended level. -
Page 21: Midi
MIDI Synchronization between console and MIDI keyboard can be achieved in this page. * Record Click “Record” and select corresponding spark machines’ indicator lights. Red lights mean recording is underway,and click “Save” to complete recording. * Play Click "play" and select the recorded MIDI key to synchronously open the recorded device. -
Page 22: Smpte
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD 5.2.8 SMPTE LTC timing code (or MIDI timing code) can play with spaecial e ects package synchronously in this page. * Edit e ects package Edit e ects package according to “ Computer Special E ects Editing So ware Description ”. -
Page 23: Rdm
Using network cable to connect multiple consoles, then one timing synchronous input signal can be synchronized with these consoles. 5.2.9 This product has RDM function which can set spark machines’ DMX address and initial temperature remotely. * Search RDM device Click the “search RDM device”... -
Page 24: Can
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD DMX address and temperature only can be set singly. 5.2.10 This product can arrange other equipment through CAN signal. * Search CAN devices Click the “search CAN device” in the top right corner,and the search result will display in the list.
Need help?
Do you have a question about the CT-05 and is the answer not in the manual?
Questions and answers