W.E. Anderson 2800 Series Installation And Operating Instructions

The Series 2800 Current to Pressure Transducer converts a current
input to a linearly proportional pneumatic output pressure. This unit
utilizes a closed loop pressure feedback system that closely controls
output and compensates for vibration, mounting angle, temperature, and
supply pressure variations. These characteristics make this unit ideal for
field mounting on a valve. The control mechanism is a piezoceramic
actuator encapsulated in a protective skin, which provides a constant
defense against humidity and contaminants. These features make this
unit ideal for use in demanding applications. The 2800 also comes in a
NEMA 4X enclosure and is field reversible. It is FM and CSA approved
intrinsically safe, as well. For ease of installation, this model has input
and output ports on both the front and back and can be easily panel
mounted.
Model Input
Output
2813-WP 4-20 mA 3-15 psig (0.2-1.0 bar)
4-20 mA
2816-WP 6-30 psig (0.4-2.1 bar)
W.E. ANDERSON DIV., DWYER INSTRUMENTS, INC.
P.O. BOX 358 • MICHIGAN CITY, INDIANA 46361 U.S.A.
Series 2800 Current to Pressure Transducer
Specifications - Installation and Operating Instructions
1
[25.4]
Ø1/8
[Ø3.17]
1-1/2
[38.1]
MOUNTING HOLES
#10-32 UNF-2B X 3/8 DP
2 PLCS
2-15/16
[74.7]
1-51/64
[45.7]
3-11/16
[93.7]
1-19/64 2-3/16
[33.0] [55.4]
SPECIFICATIONS
Service: Oil free, clean dry air filtered to 40 microns.
Input Signal: 4-20 mA.
Air Supply: Minimum: 5 psig (0.3 bar) above maximum output;
Maximum: 100 psig (6.9 bar).
Output: 3 to 15 psig (0.2 to 1.0 bar), 6 to 30 psig (0.4 to 2.1 bar).
Accuracy: ±0.1% of span.
Hysteresis: ±0.1% of span.
Repeatability: ±0.1% of span.
Deadband: 0.02% of span.
Power Requirement: Loop powered.
Temperature Limits: Operating: -40 to 160°F (-40 to 71°C); Storage: -
40 to 200°F (-40 to 93°C).
Pressure Connections: 1/4˝ female NPT.
Electrical Connection: 1/2˝ female NPT.
Air Consumption: 0.025 scfm (0.01 l/s) at midrange typical.
Output Capacity: 4.5 scfm (2.1 l/s) at 25 psig (1.7 bar) supply; 12.0
scfm (5.7 l/s) at 100 psig (6.9 bar) supply.
Enclosure: Chromate-treated aluminum with epoxy paint.
Enclosure Rating: NEMA 4X (IP65) and Intrinsically safe.
Weight: 0.8 lb (0.37 kg).
Agency Approvals: CSA, CE, FM.
Phone: 219/879-8000
Fax: 219/872-9057
Bulletin V-4
22 GA. WIRE LEADS
APPROX. 18˝ LONG
POS, NEG, GRD
1/2 NPT
Ø1-1/8
[Ø28.7]
3-1/8 IN & OUT PORTS
[79.2] 1/4-18 NPT
4 PLCS
25/64
[9.72] 49/64
33/64
[19.4]
[13.1]
www.dwyer-inst.com
e-mail: info@dwyer-inst.com