Zero Friction DistancePro ZFDP-QSG-REV12 Quick Start Manual

Thank you for purchasing your DistancePro
GPS Glove! This Quick Start Guide was
compiled to guide you through the basic
features of the DistancePro and smartphone
app. A full user manual is available for download
from the following URL:
http://www.zerofriction.com/distprousermanual
Please take a moment to confirm that the
package contains the following items:
• 1- DistancePro Device
• 2- Compression Fit Technology
2 Motion-Fit System Gloves
TM
version purchased)
• 1- CR2025 Coin Cell Battery
DistancePro; *see instructions for replacing battery
below)
• 1- Quick Start Guide
(Includes Warranty Information)
To replace the battery, use a coin to turn
the battery compartment door (IMG 1.1)
counterclockwise until the arrows align, then
remove it. Take the old battery out and insert the
new battery, making sure the positive side (+)
is facing out (img 1.2). Use ONLY the following
coin cell batteries: CR2025, 2025, ECR2025,
DL2025, BR2025, 280-205, 5003LC, or SB-
T14. To reinstall the battery compartment door,
align the arrow on the door with the arrow
on the case, then use a coin to turn the door
clockwise and lock it in place.
Battery
Compartment
Door
img 1.1
Lit #: ZFDP-QSG-REV12
SMARTPHONE APP
1
The DistancePro provides distances by utilizing
the GPS hardware on your smartphone and
receiving the data via Bluetooth
technology. Prior to golfing, install the Zero
Friction
TM
and make sure Bluetooth is enabled in your
TM
smartphone's
activation of the app, you will see a pop-up
message requesting permission to use your
location. You will need to allow this in order to
use the DistancePro app.
iPhone (iPhone 4s or newer running iOS 9.0 or later)
Samsung Galaxy Phones (S4 or newer running Android 4.3 or later)
Gloves or
TM
(depending upon
(pre-installed in
REGISTRATION
After installing the smartphone app, you will
need to complete the registration (img 2.1) to
begin using the app. This only takes a minute
or two to complete, and ensures that you have
access to support and other useful resources.
Zero Friction takes your privacy seriously and
never sells or discloses your information to third
img 1.2
img 2.1
October-2016
wireless
®
DistancePro app to your smartphone
settings. Note: Upon
parties. Please review
the Privacy Policy from
the link at the bottom of
the app (img 2.1) for full
disclosure of how we use
your information.
img 2.2
*Note: Device Product ID
is located on the back of
the DistancePro (img 2.2).
PAIRING Bluetooth
2
In order for the DistancePro to provide distances,
it must first be paired to your smartphone via
Bluetooth. You only need to complete the pairing
process once; your phone and DistancePro will
pair automatically for subsequent uses. Make
sure yours is the only active DistancePro within
30 meters of your smartphone during setup.
first
To pair your DistancePro to your phone:
1. Power the DistancePro ON by pressing
either button. The DistancePro will prompt you
to enable Bluetooth on your smartphone (img
3.1), and will search for up to 30 minutes (img 3.2).
img 3.1
2. Select the "Settings" Icon (img 3.3) from the
smartphone app's homepage.
3. From the Settings screen, select the "Pair
Device" button (img 3.4). The smartphone and
DistancePro will then search for each other.
Once they are paired, the app will display the
unique ID for your DistancePro (img 3.5).
Note: Bluetooth ID numbers display in different formats on iPhone and
Android devices. Format shown below is for iPhone.
img 3.4
You are now ready to hit the links! See pages
4 -5 for details regarding Golf Features.
3
img 3.2
img 3.3
DEVICE ID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
img 3.5