Resume - Aigo UM-F158 User Manual

Freedom in technology,Freedom in life
7. Firmware Recover
Please do not use the Windows format program. If it is used by
mistake and results in an error in the player, please recover
Firmware.
Shut down the player.
Press and hold Play
/Pause and connect the
USB cable to the PC.
Then run
black screen should ap-
pear please pull out the
USB if "ready" appears this moment, and carry out the above
steps again . If the correct picture appears, Firmware Recover
is running, please loose Play/Pause.
Execute the Format progress to Firmware recovers.
If you are using WIN XP, the system will detect the player as
new hardware. If you want to install the Player Recover Device
software, please do so according to the instructions in the
following pictures:
. A
34