Table of Contents
Advertisement
Placing the device in operation
Operation
Switching ON / OFF
To Switching ON / OFF with the rotary/push button.
Ÿ
To switch-OFF, hold the rotary/push button pressed
Ÿ
for more than 2 seconds..
Switch ON / OFF via vehicle ignition
If the car audio system is connected with the vehicle
ignition, turning OFF the ignition and removing the key
automatically switched OFF the audio system.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (mute) to 40
(maximum).
Turn the rotary/push button to change volume.
Ÿ
Muting the car audio system (Mute)
Brie y press the rotary/push button to mute the device
or to resume at previous volume.
Main menu (Home)
In the main menu, touch the icons on the touchscreen
to call up the different sources and operating modes.
In the current source, touch the [ ] button. The main
Ÿ
menu is displayed.
Display ON / OFF
In the main menu, touch [Display Off] to turn off
screen display, the audio output will continue. Touch
anywhere on the screen & the display comes back on.
Wallpaper
In the main menu, Touch [Wallpaper] button to
change the background picture.
Digital Clock
In the main menu, there is a digital clock. Press any
source icon to exit this screen.
Note:
The gures used in these instructions are intended to
facilitate explanation. Some details may vary in your
device.
06
Radio
In the main menu, touch the [Radio] icon. The radio
page menu is displayed.
Select FM / AM band
Up to 30 stations can be stored under the FM band and
AM band.
Touch the [
] button to c ycle bet ween
Ÿ
FM1/FM2/FM3/AM1/AM2 bands.
Tuning into a station
Tuning into stations manually
Brie y touch the [ I◄◄ ] or [ ►►I ] button once or
several times to change the frequency in small
increments.
Station seek tuning
Touch the [ I◄◄ ] or [ ►►I ] button for approx. 2
seconds to start station seek tuning. The radio
automatically tunes to the next receivable station.
Storing stations manually
Touch [
] to c ycle between FM1 / FM2 /
Ÿ
FM3 /AM1/AM2 bands.
Tune to the desired station.
Ÿ
Touch one of the memory buttons [1]-[6] for approx.
Ÿ
2 seconds to store the current station at that
particular location. The station is stored.
Storing stations automatically (Travel store)
Touch [
] to store the stations to [1] to [6] of
Ÿ
FM1~FM3(or AM1/AM2) automatically.
Scanning stations
Touch the [ PS ] button to listen the preset stations
Ÿ
[1] to [6] FM1~FM3(or AM1/AM2) for few seconds.
Directly enter frequency
Touch [
] button then input desired station
Ÿ
frequency and touch [ OK ] button.
Adjusting the seek tuning sensitivity
The seek tuning sensitivity decides whether the
automatic station seek tuning nds only strong
stations or also weaker stations that may have some
static.
Radio
Advertisement
Table of Contents
