Tecnoinox P-ONE Assembly Instructions

20825 BARLASSINA (MI) - via Machiavelli, 16
www.tecnoinoxsrl.it - info@tecnoinoxsrl.it

STEP 1

- Check the right position of the holes to fix the cover
POS.1 and the points to fix front stop POS.2
(View DRAWING 1)

STEP 2

- Fix on both side of cabinet the front stop in position
POS.2 with screws self-threading 3,5x20 TPS/CR

STEP 3

- Insert the cover using holes in position POS.1

STEP 4

- Screw until a space of 3-4mm n°4 screws self-threading
3,5x13 TC/CR and n°4 washers M4 using holes in POS.3 (View
DRAWING 1)
ASSEMBLY INSTRUCTIONS P-ONE
Screw self-threading
3,5x13 TC/CR
DETTAGLIO A
SCALA 1 : 1
POS. 2
POS. 1
POS. 2
Screw self-threading
3,5x20 TPS/CR
POS. 1
POS. 3
A