Advertisement
Assembly Guide for Height Extender for projector legs
Model HE-75
Assembly components:
Height extender - 4 pcs
1
Screw M10 - 4 pcs
2
Washer - 4 pcs
3
Steel Cup
3
2
Projector Pedestal
SAFETY INSTRUCTIONS
1. Entrust mounting equipment only to experienced professionals and strictly follow the providedv safety instructions. Improperly
installed equipment may result in property damage, personal injury and/or liability for the installing contractor.
2. Only use appropriate fastening hardware.
3. Always make sure to securely use and lock all mounting bolts. Loose bolts may become unscrewed over time due to vibration
which will then create a safety hazard.
www.mnmounting.com
info@mnmounting.com
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Assembly Guide
HE - series
1
Model HE-150
Screw M10
(mounting kit
included in the PAP
package)
Advertisement
Table of Contents
Summary of Contents for Mounting Solutions HE Series
- Page 1 Assembly Guide HE - series Assembly Guide for Height Extender for projector legs Model HE-75 Model HE-150 Assembly components: Screw M10 (mounting kit Height extender - 4 pcs included in the PAP package) Screw M10 - 4 pcs Washer - 4 pcs Steel Cup Projector Pedestal SAFETY INSTRUCTIONS...
- Page 2 Assembly Guide HE - series Assembly Instructions: 1. Install height extenders on Projector Pedestal and fasten it with screw washer 2. Install the Steel Cups on height extenders and fasten with a screw 3. Install the Projector on the Steel M10 (mounting kit included in the PAP Cups.
Need help?
Do you have a question about the HE Series and is the answer not in the manual?
Questions and answers