Chocolate World User and maintenance manual Semi-automatic cutters ONTENTS INTRODUCTION ......................4 CE DECLARATION OF CONFORMITY...............5 IDENTIFICATION OF THE MACHINE .................5 GENERAL DESCRIPTION...................6 Layout and components ....................7 Working cycle ........................9 Technical data sheet ......................10 INTENDED USE ......................10 Risks associated with misuse................... 11 Residual risks and safety measures.................
Page 3
Chocolate World User and maintenance manual Semi-automatic cutters Use............................ 14 Emergency stop ....................... 15 Cleaning ........................... 15 Disassembling ........................15 7.10 Disposal ..........................15 MAINTENANCE ......................15 Motherboard removal procedure on LIRA PLUS cutter ..........15 PERSONNEL TRAINING ...................15 WARRANTY ......................16 REFERENCE STANDARDS...................16...
LIRA PLUS Semi-Automatic Cutters at their optimum condition and prolong their service life. In case of loss further copies of this manual can be obtained from CHOCOLATE WORLD CHOCOLATE WORLD holds no liability in case of damage due to misuse, neglect or non- compliance with these instructions.
In order to certify that our machine has met all EU consumer safety, health or environmental requirements, CHOCOLATE WORLD, as a manufacturer and compiler of the technical documentation, has drawn up the CE Declaration of Conformity (Annex 1) and affixed the CE marking on the machine (Section 3).
Chocolate World User and maintenance manual Semi-automatic cutters ENERAL DESCRIPTION The LIRA and LIRA PLUS Semi-Automatic Cutters are intended for use in the food processing industry to cut food and/or sweet products. The cut width depends on the thickness of the cutting frames used. To this end, interchangeable cutting frames are available.
Chocolate World User and maintenance manual Semi-automatic cutters Layout and components The next figures show: − cutter detail drawing (figure Error! Reference source not found..2); − LIRA cutter control panel (figure Error! Reference source not found..3); − LIRA PLUS cutter control panel (figure Error! Reference source not found..4) See Annex II to this manual for the full spare parts list.
Page 8
Chocolate World User and maintenance manual Semi-automatic cutters Figure Error! Reference source not found..2: Cutter detail drawing Esploso della macchina mod. Lira and Lira Plus = Lira and Lira Plus cutter detail drawing; Page 8 of 17...
Chocolate World User and maintenance manual Semi-automatic cutters Figure 4.3: LIRA cutter control panel Pulsante luminoso Start = Start light switch; selettore di marcia Run = Run mode selector dial (forth/back); pulsante di emergenza Fungo = Emergency mushroom push button; regolatore di velocità...
Chocolate World User and maintenance manual Semi-automatic cutters Figure Error! Reference source not found..5: The cutter working cycle Technical data sheet MODEL LIRA LIRA PLUS Size L 900 x W 500 x H 240 L 900 x W 500 x H 240...
Chocolate World User and maintenance manual Semi-automatic cutters Risks associated with misuse Follow the tips below to preserve your machine in good order and avoid any risks. Misuse Associated risk Do not cut products that do not fit in the tray or...
INSTRUCTIONS FOR SAFE USE We are giving below some general instructions for safe use of the machine. CHOCOLATE WORLD holds no liability in case of damage to property or injury to individuals due to non-compliance with the instructions given in this section.
− a user and maintenance manual; and − a demonstration CD. At least two people are needed to carry the machine. CHOCOLATE WORLD suggests that you keep the original packaging for safe shipping of the machine should replacement/repair be required. Installation and start-up Have two people take the cutter out of the original packaging, then place it on a work surface that is flat and wide enough to accommodate it safely, or on its stand.
Chocolate World User and maintenance manual Semi-automatic cutters The following checks have to be carried out regularly on the protection and safety devices: • emergency stop and cycle restart; − start a new working cycle; − push the EMERGENCY STOP BUTTON;...
Only CHOCOLATE WORLD authorised personnel have to perform maintenance and repair of the cutter except for activities described in Section 8.1 below. Therefore, should you require service or spare parts, please call CHOCOLATE WORLD at +39 0746 491604. Motherboard removal procedure on LIRA PLUS cutter With machine standing and off the mains power supply, remove the control panel by unscrewing the four screws that hold it down (see Figure Error! Reference source not found..2).
This warranty does not apply to damage caused by service performed by anyone who is not a CHOCOLATE WORLD authorized service provider; or to damage caused by use with non- CHOCOLATE WORLD products; or to damage caused by a product or part that has been modified to alter functionality or capability of the machine.
Chocolate World User and maintenance manual Semi-automatic cutters - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits;...
Need help?
Do you have a question about the M1920 and is the answer not in the manual?
Questions and answers