Introduction The IP Camera allows you to monitor your home anywhere using your mobile phone. It is designed with a high definition processing chip that gives high quality, fast loading images day and night. This guide will provide you with an overview of the product and help you get through the initial setup.
Storage card Reset Get Started 3.1 To get started, you will need: A Gateway. The mobile app. 3.2 Set up your IP camera 1. Connect your IP camera to the USB power adaptor and apply power. 2. The LED indicator will flash blue after the IP camera is powered on. If not, reset the camera by pressing the reset button for three seconds.
Technical Specifications Power Supply • USB Port DC 5V ±10% • Lens: 1 megapixel Camera • Prime lens: 3.6 mm Storage • Support TF storage (maximum 32G) • Supports motion detection, will Alarm sound an alarm when the network is disconnected, memory is full, etc.
Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the IP camera and other property. Read all the safety notices below before using the IP camera. • Avoid high humidity or extreme temperatures. •...