NRS P78222 User Instructions

P78222
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in a
safe place for future reference.
1.0 INTENDED USE
The NRS Double EasyFit Bedguard is designed to
prevent users from rolling out of bed.
The bedguard has adjustable sliding guard
mechanisms, which can be extended or retracted
for easy access on and off either side of the bed.
The bedguard can be used on divan and slatted
beds, from single to king size.
The bedguard rail sections can be removed to
make bed making easy.
2.0 SAFETY
318mm
Min
WARNING: The bedguard must be positioned at
least 318mm (12.5") away from the headboard.
The bedguard must always be positioned as
close as possible to the mattress, to prevent user
entrapment.
Do not fi t this product to height adjustable or
profi ling beds.
NRS DOUBLE EASYFIT BEDGUARD
NRS Double EasyFit Bedguard
Minimum
distance from
headboard or
footboard
USER INSTRUCTIONS
The Bedguard is not designed to be used as a bed
rail. It will not support the users bodyweight.
Not suitable for use by children.
Some tasks within these instructions may require
two people.
3.0 UNPACKING
3
2
Remove the packaging and check all parts
carefully. Contact your supplier immediately if
parts are missing or damaged and do not try and
assemble.
Contents:
1. Base-frame
2. Bedguard Rail x 2
3. Bedguard Extension Rail x 2
4. Base Adjustment Rail
5. Mesh Cover x 2
1
3
2
5
1
5
4