Table of Contents
Advertisement
All manuals and user guides at all-guides.com
2445.3 en
11-10-2005
Tips
Tips
• Have you selected the correct TV system in the manual installation menu?
Poor Picture
• Is your TV or house aerial located too close to loudspeakers, non-earthed audio
• Mountains or high buildings can cause double pictures or ghost images.
• Is the picture or teletext unrecognisable? Check if you have entered the correct
• Check the HDMI connection.
• Are the supplied cables connected properly ? (The aerial cable to the TV, the
No Picture
• Has the child lock been switched off ?
• Is your PC switched on ?
• Do you see a black screen and the indicator in front of the TV lights up green,
• In case of weak or bad signal, consult your dealer.
• Your TV has a protective mode in case there is too much heat build-up.
No picture and
power switched on
The low quality of some digital picture material may be the cause of digital image
Digital distortion
distortion. In this case select the Soft setting using the Smart picture key a on
the remote control.
No sound
• No sound on any channel? Check the volume isn't at minimum.
• Is the sound interrupted with the mute key ¬?
• When no TV signal is detected, the TV automatically switches off the sound.
Switch your TV off and then on again once. Never attempt to repair a defective
No solution found
for your picture or
TV yourself. Check with your dealer or call a TV technician.
sound problem ?
Menu
Have you selected the wrong menu? Press the
menu.
Remote control
• Check if the remote control is in the correct mode.
• If your TV no longer responds to the remote control, the batteries may be dead.
• You can still use the
Standby
Your TV consumes energy in the standby mode. Energy consumption contributes
to air and water pollution. Power consumption: 2 W.
Control of
• The infrared signals of the screen may influence the reception sensibility of
accessory devices
Miscellaneous
. Ambient temperature: + 5~ + 40°C
. Mains: 50/60 Hz
. Auto Voltage ranging from:
. Power consumption: 37PF7320: around 167W; 42PF7320/7320Z: around 230W;
. Standby consumption: < 2 W
. Weight (excl. packaging): 37PF7320: 23,2 kg; 42PF7320/7320Z/7520Z: 37,3 kg;
. Dimensions (wxhxd): 37": 1105x610x97; 42": 1240x680x104; 50": 1415x780x104
22
10:45
Pagina 22
equipment or neon lights, etc.?
Sometimes you can improve the picture quality by changing the direction of the
aerial.
frequency. See Store TV channels, Manual store,p. 15.
other aerial to your recorder, the VGA cables to the display, the power cables.)
this means that the display mode is not supported.
Switch your VGA- or HDMI-source to a correct mode.
Check the clearance around the vents of the device to be certain there are no
blocking walls or cabinets which would limit the air flow.
This is proper operation and does not indicate a malfunction.
key and the -/+ keys on the right side of your TV.
MENU
other peripherals.
Solution: replace the batteries of the remote control of other devices.
E.g. keep away a wireless headphone from within a radius of 1 m.
110 - 240V : 42PF7320; 42PF7320Z; 42PF7520Z; 50PF7320;
220 - 240V : 37PF7320; 42PF7420;
42PF7420: around 246W; 42PF7520Z: around 305W; 50PF7320: around 420W;
42PF7420: 27 kg; 50PF7320: 50 kg
key again to exit from the
MENU
Advertisement
Table of Contents
