Noblex 37LC804H Service Manual page 31

Mechanical Disassembly
5. LCD Panel Removal
1.
Remove 2 screws and take Stand Pole off.
2.
Remove each 3 screws and take two Panel Holders (upper) off.
3.
Remove each 2 screws and take four Panel Holders (side) off.
4.
Remove each 3 screws and take three Panel Holders (bottom) off.
5.
Take LCD Panel off from the Cabinet Front.
Panel Holder (bottom)
For Gasket
The gasket is provided to prevent exposure of interference for other radio and television receptions.
The gasket should be replaced on previous positions after servicing.
Panel Holder (upper)
LCD Panel
Stand Pole
-31-
Panel Holder (bottom)