Advertisement
Quick Links
Nest x Yale Lock Installation Guide
This manual will walk you through all the required steps to add your new
Nest x Yale Lock to your door.
• Remove existing deadbolt
• Double check door measurements
• Install your Nest x Yale Lock
• Program your Nest x Yale Lock
• Add your Nest x Yale Lock to your Nest App
Tools Needed
Tools Needed For New
Doors Or Adjusting Existing Door
Utility
Drill
Knife
Failure to follow these instructions could result in damage to the product and void the factory warranty.
Standard
Phillips Head
Screwdriver
Wood
Tape
Pencil
Mortise
Measure
Chisel
P/N RB-YRD540 Rev 2
Before you begin
DOWNLOAD
THE BILT APP
Using the app on your smart
phone, scan this QR for step-by
-step installation instructions & to
register your lock
Level
1
Advertisement
Summary of Contents for Bilt Nest x Yale
- Page 1 • Remove existing deadbolt • Double check door measurements • Install your Nest x Yale Lock • Program your Nest x Yale Lock • Add your Nest x Yale Lock to your Nest App Tools Needed Before you begin DOWNLOAD...
-
Page 2: What's In The Box
What's In The Box Warning Status Settings Indicator Speaker Back Button Enter / Unlock (Set / Continue) Low Battery Failsafe 9 Volt Indicator Battery Connection (Use Alkaline battery) Key Free Touchscreen Keypad 000XXX XXXX0000000 Let's Get Started Installation Guide and Door Template Battery Cover Battery Cover Nest Connect... - Page 3 Remove Existing Deadbolt Do not discard old lock hardware until Nest x Yale Lock has been successfully installed. Frame P/N RB-YRD540 Rev 2...
- Page 4 • Google Nest Alarm System Your new Nest x Yale Lock is easy to control through the Nest App. The app will allow you to program your lock and share access. If you aren't using the Nest App, we highly recommend downloading it now.
- Page 5 Install Deadbolt and Strike Plate *2-3/8" Backset, default *Deadbolt position is based on backset. Choose position For Deadbolt appropriate for your door. Actual Size Reference Door Checker measurements E and F. AYRDB-DRIVE Adjustable Drive-In Deadbolt available for purchase on ShopYaleHome.com *2-3/4"...
- Page 6 Install Touchscreen Keypad Bolt must be in retracted (unlocked) position. Note horizontal orientation of tailpiece slot. Door face hole must be at least 2-1/8". If hole is too small, a door lock installation kit or jig should be used to increase hole size.
- Page 7 Install Inside Mounting Plate Choose through bolt appropriate for your door thickness. Verify appropriate through bolt with the door checker. Actual Size Screw Set B Actual Size Green Screw Set C 1-3/8" Black Actual Size Door Thickness Standard for 1-3/4" Screw Set D Door Thickness Silver...
-
Page 8: Remove Battery Cover
Remove Battery Cover 000XXX XXXX0 000000 Attach Cable Make sure to connect cable securely with black mark side up. Use cable hooks for proper cable routing. Do not pinch cable. P/N RB-YRD540 Rev 2... -
Page 9: Test Operation
Install Inside Lock Actual Size 000XXX XXXX0 000000 Make sure bolt is retracted. Make sure inside lock is properly seated on bottom of mounting plate and excess cable is tucked into lock cavity. Test Operation 000X XX XXX X000 0000 Close door and check bolt operation. -
Page 10: Install Cover
Yale and Nest.” QR code 000X XX XXXX 0000 000 If you are pairing your Nest x Yale Lock with the Nest App, you should scan the QR code on the inside of the lock at this time. Install Cover 000X XX... - Page 11 24/7 Product Support : 1-855-213-5841 • US.YaleHome.com Nest x Yale Lock is a smart lock by ASSA ABLOY that pairs to a Google Account and uses Google services to connect to the internet. For set up and full feature access including remote control, mobile alerts, and software updates, Nest x Yale Lock requires the Nest Connect (included in box) and a working internet connection over Wi-Fi, the free Nest app, and an active Google Account.
Need help?
Do you have a question about the Nest x Yale and is the answer not in the manual?
Questions and answers