WineEnthusiast N'FINITY HDX Quick Start Manual

N'FINITY HDX WINE & BEVERAGE COOLER
Quick Start Guide
PLEASE READ THE USER MANUAL CAREFULLY
BEFORE INSTALLING AND OPERATING
Before connecting the wine cellar to the power source, let it stand upright, in
position, for approximately 24 hours. This will reduce the possibility of a
malfunction in the cooling system due to handling during transportation.
Then fill it at least 1/3 to 1/2 full before powering 'on'.
Once you have plugged the unit into an electrical outlet, let it run for 30
minutes before making any adjustments.
The wine cellar capacity is based on 'standard' Bordeaux-size bottles. If up
to 1/2 of your collection consists of non-standard Bordeaux-size bottles,
your maximum capacity may be reduced by 20% - 40%.
Operating Your Wine and Beverage Cooler
Each wine and beverage cooler includes an operating panel on the front of
the unit. This operating panel includes several features to operate and
control the temperature.
Setting the Temperature Control
NOTE: The temperature readout indicates set temperature while
programming then reverts to the actual temperature.
1. To set the desired temperature press the Temperature Set (5) button.