Before You Start (First Power Up); Button Operation; Led Indication - Salus SR600 Full User Manual

5. Before you start (first power up)

5.1 Button operation

5.2 LED Indication

Joining Network automatically
Joining Network trigger by button press
Device is within Network - Relay ON
Device is within Network - Relay OFF
Device is out of the Network - Relay OFF
Device is out of the Network - Relay ON
Identify function enabled
COM
What the button is for:
1
To identify the device, short press the button.
2
To enter pair mode, press and hold the button for 3 seconds.
To do a factory reset, press and hold the button until LED flashes red (max 15 sec).
3
Description
NO L N S1 S2
LED State
RED
LED flashing
ORANGE
GREEN
RED LED ON
RED
LED flashing
ORANGE
GREEN
LED turn on for 1s
LED ON
LED flashing
LED flashing for up to 10 minutes
9