Summary of Contents for Pullman M7P
- Page 1 IDEAL FOR: Car Cleaning Garages Motels & Hotels Restaurants & Cafes SPRAY EXTRACTOR 1200W (10AMP)
- Page 2 16. Only use a cleaning solution recommended 6. Do not run the appliance over the power by an authorised Pullman Representative. cable and power socket on the floor. 17. Do not use any high-foaming solutions as...
-
Page 3: Before You Begin
This machine is equipped with a cord and plug. In the event that either of these parts get damaged, it must be repaired by a qualified technician. Warning: For your safety, disconnect the cleaner from the power supply before you refill the water tank, empty the bin or change the accessories. PULLMAN M7 SPRAY EXTRACTOR... -
Page 4: Know Your Product
3. Vacuum Switch 4. Pump Switch 5. Connection Latches 6. Solution Tank Canister 8. Rear Wheel on Axle 9. Floor Tool 10. Hose Inlet 11. Castor Wheel 12. Uphostery Tool 13. Fabric Nozzle Technical Information Model: M7P Voltage: 240V Max Power: 1200W... - Page 5 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 11 Fig. 12 Fig. 13 Fig. 10 PULLMAN M7 SPRAY EXTRACTOR...
- Page 6 Fig. 14 Fig. 15 Fig. 16 Fig. 18 Fig. 17 Fig. 19 Fig. 21 Fig. 20...
- Page 7 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 27 Fig. 26 PULLMAN M7 SPRAY EXTRACTOR...
-
Page 8: Preparing The Appliance
PREPARING THE APPLIANCE Assembling the hoses Professional hose assembly for fabric washing (if present) - Insert, as far as possible, the sleeve (1 Fig. 1) of the suction hose into the nozzle (2 Fig. 1) on After connecting the suction hose to the outlet the drum. -
Page 9: Using The Appliance
Fig.13). work for several seconds and then wash the - Press the switch (28 Fig.15) to dispense area and suction the dirt. the detergent, release the button to stop dispensing. The switch (28 Fig.15) can be PULLMAN M7 SPRAY EXTRACTOR... -
Page 10: Switching Off The Appliance
NOTE: To prevent the detergent pump Switching off the appliance from breaking, it is recommended that you - Press the switches (24 and 25 Fig.13) to “0” stop its operation, pushing the relative to switch off the appliance; the lamps on the switch, when dosing has not occurred for switches will go out. -
Page 11: Cleaning And Maintenance
- Reassemble all of the parts performing these careful not to distort the shape of the nozzle. operations in the reverse order. - Reassemble all of the parts performing these - Pour clean water into the detergent container, operations in the reverse order. PULLMAN M7 SPRAY EXTRACTOR... - Page 12 Cleaning the detergent suction filter Replacing the floor nozzle squeegee (if present) If you note that the detergent is not being suctioned properly, check and clean the suction If when washing the floors the washing liquid filter located inside the detergent tank. is not suctioned properly and the floor or carpet remains wet, check the condition of the - Using a screw driver, loosen the suction cap...
-
Page 13: Specifications
SPECIFICATIONS Voltage: 240V Max Power: 1200 W Sound level: 81 dB(A) Suction Power: 22 Kpa Useful capacity tank: 10L Detergent tank capacity: 8L Weight: 12 kg Accessories: Ø 36 mm PULLMAN M7 SPRAY EXTRACTOR... -
Page 14: Troubleshooting
TROUBLESHOOTING TROUBLE POSSIBLE CAUSE REMEDY The vacuum cleaner Switch not pressed. Press the switch. does not work. Plug not inserted. Insert the plug into the socket. Power cut. Check the power line. Suction is not Accessories or tubes clogged. Check and clean the flexible hose satisfactory. -
Page 15: Customer Care
For customer service or product enquiries please contact 1800 815 270 (AU) or 0800 282 288 (NZ) PRODUCT NUMBER PRODUCT DESCRIPTION 33500114 Small Castor Wheels 31150055 Squeegee Replacement 33200762 On/Off Switch (Vacuum) 31110211 Carpet Floor Tool 31220444 Hose Assembly 31300548 2-Piece Tube 31150321 Upholstery Tool 33200763 On/Off Switch (Pump) PULLMAN M7 SPRAY EXTRACTOR... -
Page 16: Conditions Of Warranty
Conditions of warranty Your Pullman cleaner has a to repair or replace the cleaner, it will do so at its one year parts and labour own cost. warranty against product Electrical Home-Aids Pty Ltd is unable to accept defects and failures when the...
Need help?
Do you have a question about the M7P and is the answer not in the manual?
Questions and answers