Advertisement
Table of Contents
3 - TIER CORNER PLANT STAND
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.
HELPFUL HINT
This item was treated with teak oil at the factory. Apply a suitable wood oil at least once a year, or
when the wood looks particularly dry. Left untreated, the wood will weather to a silvery gray color.
LY445
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@nethealthshops.com, or via our contact us page at
Assemble components on a soft, clean surface to avoid damaging the finish.
/
/
Order/Customer Reference Number:
LAM-646
02/2020
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
No.
Parts
A
B
C
D
CHOKING HAZARD — This item contains
small parts that can be swallowed. Keep
children away during assembly.
Qty.
Shelf
3
Leg
3
JCBC 40mm
9
Hex Key
1
Page 1 / 2
Advertisement
Table of Contents
Related Manuals for Sunnydaze LAM-646
Summary of Contents for Sunnydaze LAM-646
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 ASSEMBLY Do not fully tighten any bolt NOTE: until all bolts have been placed. 1. Connect Leg (B) to Shelf (A) by hand-tightening 3x JCBC 40mm (C). 2. Repeat step 1 until all legs have been attached shelves. 3. Gently tighten all the bolts using Hex Key (D).
Need help?
Do you have a question about the LAM-646 and is the answer not in the manual?
Questions and answers