TESTO 915i Quick Start Manual page 2

Approval and Certification
Product testo 915i
产品名称
Mat.-No.
0560 1915
型号
Date
18.05.2021
日期
The use of the wireless module is subject to the regu-
lations and stipulations of the respective country of use, and
the module may only be used in countries for which a coun-
try certification has been granted. The user and every
owner has the obligation to adhere to these regulations and
prerequisites for use, and acknowledges that the re-sale,
export, import etc. in particular in countries without wireless
permits, is his responsibility.
Country Comments
Australia
Canada IC ID: 6127B-05601915
see IC Warnings
China CMIIT ID: 2021DJ5252
Europa + EFTA
The EU Declaration of
Conformity can be found on
the testo homepage www.
testo.com under the product
specific downloads.
EU countries:
Belgium (BE), Bulgaria (BG), Den-
mark (DK), Germany (DE), Estonia
(EE), Finland (FI), France (FR),
Greece (GR), Ireland (IE), Italy (IT),
Latvia (LV), Lithuania (LT), Luxem-
bourg (LU), Malta (MT), Netherlands
(NL), Austria (AT), Poland (PL), Por-
tugal (PT), Romania (RO), Sweden
(SE), Slovakia (SK), Slovenia (SI),
Spain (ES), Czech Republic (CZ),
Hungary (HU), United Kingdom
(GB), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway,
Switzerland
WEEE Reg. no.:
DE 75334352
Hongkong Authorized
Malaysia Type Approval Code:
RGOF/05A/0321/S(21-1025)
South Africa TA-2020/8307
Turkey Authorized
USA
FCC ID: WAF-05601915
see FCC Warnings
Bluetooth®-
Information
Bluetooth®
E 1561
SIG Listing
EU SAR Information
The SAR limit of Europe is 2.0 W/kg. The highest SAR
value reported for 0560 1915 under testing standard for use
in hand is 0.275W/kg. This device and its antenna(s) must
not be co-located or operating in conjunction with any other
antenna or transmitter.
ISED Warnings
CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe [B] est conforme à la
norme NMB-003 du Canada.
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including inter-
ference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
ISED SAR warning:
The highest SAR value reported under this standard during
product certification for use in the hand is 0.450W/kg.
Co-Location:
This transmitter must not be co-located or operated in con-
junction with any other antenna or transmitter.
Avertissement DAS d'ISED:
La valeur DAS la plus élevée rapportée durant la prise en
main pour utilisation selon la norme standard de certifica-
tion de produit est de 0,450 W / kg.
Co-location
Ce transmetteur ne peut pas être installé en colocation ou
être utilisé avec une autre antenne ou transmetteur, quel
qu'en soit le type.
Feature Values
特征与参数 数值
Bluetooth® up to150m
range / (490 feet)
范围
(free field /
无障碍
)
场地
radio type Bluetooth® Low
Energy (BLE) 4.2
型号
company LSD Science &
制造商
Technology Co.,
Ltd
Lierda
LSD4BT_S37
RF Band 2402 – 2480MHz
射频频段
power output 13.70dBm
输出功率
Declaration ID D043363
member company Testo SE & Co.
KGaA
brouillage
FCC warning statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit diffe-
rent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
Caution
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment. Shielded interface cable
must be used in order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC SAR warning:
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one
gram of tissue. The highest SAR value reported under this
standard during product certification of 0560 1915 (FCC
ID:WAF-05601915) for use when properly worn in the hand
is 0.450 W/kg.
Co-Location:
This transmitter must not be co-located or operated in con-
junction with any other antenna or transmitter.
Mat.-No.
0560 1915 08
型号
Country Comments
Japan Contains Lierda S37 BLE module
R 201-200983
See Japan Information
South Korea
R-R-te2-05601915
see KCC Warning
Bluetooth®
Feature
Information 特征与参数
Bluetooth®
range /
范围
power output
输出功率
KCC Warning
해당 무선 설비는 운용 중 전파혼신 가능성이 있음。
Japan Information
当該機器には電波法に基づく、技術基準適合証明等を
受けた特定無線設備を装着している
Values
数值
up to100m (328
feet) (free field /
)
无障碍场地
9.37dBm
。