Download Print this page

Strawbees FRIENDBOT Assembly Instructions

Download this manual

FRIENDBOT

Make a new companion to react and

express when meeting new friends.

Use motion with the micro:bit as

meaningful movement to express

different feelings for the Friendbot.

x 8

x 2

x 4

x 1

x 3

FRIENDBOT HEAD

Bend 8 of the 3-leg

connectors

x 8

Take a 2-leg servo

arm and fit 2

yellow straws

x 2

x 16

x 17

x 10

x 1

x 2

Build 2 squares

with 8 orange

straws

Fit 2 of the 2-leg

connectors on

yellow straws

x 2

Need help?

Do you have a question about the FRIENDBOT and is the answer not in the manual?

Page 1 FRIENDBOT Make a new companion to react and express when meeting new friends. Use motion with the micro:bit as meaningful movement to express different feelings for the Friendbot. x 16 x 17 x 10 FRIENDBOT HEAD Build 2 squares Bend 8 of the 3-leg...
Page 2 Take 4 of the 1-leg connectors square to orange and 2 yellow straws, build 2 straws to close beams the head FRIENDBOT BODY Bend 8 of the 3-leg connectors Slide the beams on orange straws and click Take 1 yellow...
Page 3 Take 3 yellow straws and 1 Attach the top orange straw. Build the top part part to pink of body straws complete the body Take 2 of the 1-leg connectors and Slide the beam on yellow straws 1 orange straw, build an orange of top of body beam and click...
Page 4 Take 2 of the 5-leg Slide arms on connectors and fit to the pink straws in beams to make 2 arms front of body and click the arms Find & try the coding cards with this icon: https://makecode.microbit.org/pkg/strawbees/pxt-robotic-inventions...