Operation and Maintenance Instruction LNK-OM-LR-03A/V3.2 OF C ABLE ONTENTS SECTION ⅠP URPOSE ..........................2 SECTION ⅡD ESCRIPTION ........................2 SECTION Ⅲ I NSTALLATION NSTRUCTIONS .................... 4 SECTION Ⅳ S TORAGE EQUIREMENTS ....................7 SECTION Ⅴ S & S ERVICE AFETY ....................
ESCRIPTION Introduction LNK-LR-03A liferaft light is lithium battery-powered emergency light to be installed with liferaft. When the liferaft is inflated the “O” shape ring of the light (① of Figure2-1) will be pull out, then the switch clip (② of Figure2-1) will open and both of external and internal lights will be automatically activated.
Page 4
Fire-resistant, Oil-resistant, Mould-proof, Performance Corrosion-proof, Water-proof. Environment Performance Meet RoHS and asbestos-free requirements. Standards MSC.81(70) as amended, USCG 161.101 Certifications MED、USCG、CCS Table 2-1 Technical parameter 2.4Marking 2.4.1 Standard product label markings of LNK-LR-03A liferaft light is shown as below picture. Figure2-2:...
LNK-LR-03A liferaft light fits for all types of life rafts. 3.2 Installation Requirement LNK-LR-03A liferaft light is installed together with life raft, When the liferaft inflated, the light will be automatically activated and provide indicating light signal for liferaft, and basic illuminating need such as reading instructions for the survivors.
Page 6
Operation and Maintenance Instruction LNK-OM-LR-03A/V3.2 3.2.2 Unscrew the Fixing-ring from the external light, Make it go through the fabric on the apex of the liferaft canopy(designated place for external light). And screw the fixing-ring tight and firmly to fix the external light as below Figure3-2; Liferaft canopy fabric Fixing-ring of lights Figure3-2...
Page 7
Operation and Maintenance Instruction LNK-OM-LR-03A/V3.2 Figure3-3 3.2.5 The “O” shape ring should be tied tightly with a suitable part of liferaft by cord and make sure the “O” shape ring must be pulled out automatically when the liferaft is inflated. Once the ring have been pulled out, The switch clip will automatically open and both internal and external lights will activated.
& S ERVICE AFETY 5.1 The service life of LNK-LR-03A liferaft light is five years from the date of manufacture. During the service time the storage and application conditions should meet the Section Ⅳ storage requirements. 5.2 Once the lights was been activated ,the external light can keep working for more than 4.3cd light intensity during at least 15 hours at -30℃.
SECTION Ⅶ M AINTENANCE LNK-LR-03A liferaft light is maintenance free, but During the storage period, the light`s “O” ring in its correct position and switch clip remains closed all the time. SECTION Ⅷ R...