Advertisement
3
Cable Connections
HUAWEI Touch is a tablet used to operate Huawei's next-generation endpoints. The Touch can
be:
1
Connected to the TOUCH port on the endpoint using a network cable and powered through
the TOUCH port (supported only by the Box 300, Box 600, and Bar 500).
2
Connected to the PoE port on the PoE adapter using the Touch network cable and powered
by the PoE adapter. Connect the DATA port on the PoE adapter to the network where the
endpoint is located.
Internet
Endpoint's network
3
Connected to the PoE port on the PoE adapter using a Touch network cable. The Touch is
connected to the endpoint over Wi-Fi and powered by the PoE adapter.
For the settings required for connecting the Touch to an endpoint, see the configuration
guide of the corresponding model.
Touch network cable
Touch network cable
Network cable
Touch network cable
Endpoint (TOUCH port)
PoE adapter
Endpoint
PoE adapter
Power cable
Power cable
Advertisement
