Using This Kettle; Boiling Water - kobi KGK17L Instruction Manual

USING THIS KETTLE

This kettle is only suitable for boiling water . Do not
boil other liquids in this kettle .

Boiling Water

1 . Remove the kettle from the power base and
place the kettle on a dry, level surface for
filling .
2 . Press the lid release button and fill the kettle
with water .
NOTE: The water level must sit between the
"MIN" and "MAX" line .
3 . Push down on the lid to close the lid .
4 .
Place the kettle back on the power base and
then plug the power cord into an outlet .
5 . Press the On/Off switch to turn the kettle on .
The indicator light turns on and the water
starts heating .
The kettle automatically turns off once the
water has finished boiling .
6 . Lift the kettle from the power base, then pour
the hot water into the desired container .
NOTE:
•
You can stop the heating process at any time
by flipping the On/Off switch to Off .
• This kettle has a boil-dry safety feature .
If there is no water in the kettle, the kettle
automatically turns off to prevent the power
base from overheating .
• If the kettle overheats, fill it with cold water
and wait two minutes before using again .
7