Page 2
Warnings Making tips The product is not suitable for children 1. LED wiring indication: under 14 years old. The should be under custody of adults when playing with the White=Positive;Grey=Negative. product. 2.Use a craft blade to carefully There are small parts, please do not swallow skim over the plastic to bare the them for avoiding dangerous accidents.
Product information Sign Shop Sign Sun umbrella Floor sign Railing Cart Chocolate Chocolate Chocolate Chocolate Chocolate tray lollipop sauce biscuit Street light Flower groove Flower Chocolate groove Chocolate Gift box Flower pot Chair...
Page 4
Cabinet Cut F14 two pieces with 0.5cm long. Use a pencil to draw the D07 in four, so as to make easy. (it is recommended that the A09-03 and A09-06 be put in the cabinet and then glued on D13 as shown. Chocolate A Chocolate B Chocolate cup...
Chocolate sauce Cut F04 two pieces with 1.5*1.5cm. Cut G19 two pieces with 1.1cm long Circular gift box Cut F08 Gift box Attach the excess to the back.
Page 6
Display cabinet Cut out A07 according to the template A09- 11 as shown. Draw a crease with a knife according to the dotted line on the template paper as shown. (Color can be random with picture for reference only.) Chocolate cake Chocolate C Press the four sides gently with your fingers so that the bag bulges as shown.
Page 7
Chocolate platter (Color can be random with picture for reference only.) Cut out F12 Chocolate lollipop Poke nine holes in box as shown. (Color can be random with picture for reference only.) Chocolate box Little flag Fold A09-17 in half before cutting. Bread F11 into Cut F11 out with 3.7cm two pieces as shown.
Page 8
Heart chocolate 1.5*1.5cm Knead the F04 into small balls as shown. The making method of bow, please refer to page 4. Chocolate tower Cut F05 according to the (Color can be random with template A09-19 as shown. picture for reference only.) Counter Chocolate D The making method of A09-22,...
Page 9
Cut F01 according to the template of A09-24 as shown. To cut a small opening at the top of A09-27-1 with Cut F14 with 9.8cm long as shown. scissors as shown. Book (Color can be random with picture for reference only.) The making method of A09-28, please refer to Page 7.
Page 10
Tulips Cut out F02 with 4*5.3cm Cut out F13 with Cut out F02 with Cut F02 according to the 2.5*7cm template of A09-30 as shown. (Please note that F02 has a vertical line) Cut out F02 with 2*7.5cm Flower Cut out F02 with 2*12cm Scratch the upper part of the leaf with *please note that the F02 has a vertical line.
Page 11
Shade Door Roof sign The making method of bow, please refer to page 4. Cut A07 according to the template of A09-37 as shown. Fence Roof...
Top lamp Outer frame Cut A07 according to the template of A09-40 as shown.
Page 13
Music machine core manual guide (If you have purchased the music machine core, please fix it firstly) Shop sign Window Cut F11 with 2.5cm long...
Page 14
Beak the F11 into two pieces. Rubber paper Street light Tear off the rubber paper, and fix H02 on the board as shown. Trim all the LED wiring to the same length. Use a craft blade to carefully skim over the plastic to bare the copper wire.
Page 15
Floor sign Flower Flower Flower Sunshade Installation of dust proof cover (For updated version, the parts need to be purchased separately) 1. Tear off kraft paper of each J04 Transparent cover J05 Transparent cover piece of transparent cover. 0.18*16*20 (3pieces) 0.18*15.64*16(2pieces) Photo of Dust proof cover 2.Paste J04 andJ05 together to...
Page 16
Attention: Please keep the instruction manual for future enquires after installation.
Need help?
Do you have a question about the C007 and is the answer not in the manual?
Questions and answers
what size battery do i use for the c007 kit
The DIY C007 kit requires 3 LR44 or AG13 batteries, which are not included in the package.
This answer is automatically generated
What battery put insiste