Advertisement
23. Install one caster on the leaf support.
24. Unpack the Leaf from the Leaf box.
25. Open the Leaf Support perpendicular to the Back Cross Connector.
26. Align the Leaf hinge halves with the halves on the backs of the tops and
install the remaining hinge pins.
27. Fasten the electric lifts to their respective tops using two 5/8" pan head
screws as shown in the photo right.
28. Fasten the two remaining Door Casters on each of the bi-fold doors using
the remaining 5/8" pan head screws.
29. Install a Rubber Caster Bolt Cap on the exposed threads of the 4 Locking
U-Casters in the front, one on the Leaf Support Non-Locking U-Caster
and the last on the right Top Support Non-Locking U-Caster.
Assembly is complete.
Instructions_6300.odt Rev 1
11/04/16
Pg. 2 of 2
Advertisement
